Description
This is a small directional spot with a deep, slim body and a soft sand black finish that keeps the fitting quiet against a dark ceiling. The LED sits inside, tuned to a warm white 3000K that reads soft and slightly golden on plaster, timber and paint. It draws 7W and gives a tight, controlled beam rather than a broad wash, so light lands where you point it and falls away cleanly. Its driver comes with it. It is not dimmable, so it is best switched on a circuit where full output is what you want.
We reach for a spot like this where the job is precision: a painting on a chimney breast, a run of shelves, a sculpture on a plinth, the working end of a kitchen. The 11cm body gives the LED some depth, which helps keep glare out of eye level when the fitting is aimed down into a room. It suits galleries at home, hallways with something worth looking at, and open-plan rooms where a few pools of light do more good than one bright ceiling. Warm white keeps it comfortable in living spaces.
The finish is a fine matt sand black, low in sheen, so it shows fingerprints and reflections less readily than gloss. Wipe the body now and then with a dry cloth, switched off and cool; nothing stronger is needed, and solvents should stay well away. It carries a three year warranty. We stock the same spot in sand gold and sand white, and in a shorter body for a lower profile, with a smaller version for tighter jobs. The LED is integral, so there is no lamp to fit.
Specification
| Colour |
Sand Black |
| Weight |
0.21KG |
| Diameter |
50mm |
| Height |
110mm |
| Materials Used |
Aluminium |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 7W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| Number of Switching Cycles |
30000 |
| Average Life of LED |
30000hrs |
| LED Brand |
OSRAM1202 |
| Qty of SMD |
1 |
| LED Power |
7W (±5%) |
| LED Voltage |
36V (±5%) |
| Type of LED |
COB |
| Lumens per Watt (lm/W) |
80lm/W (±5%) |
| Beam Angle |
24º |
| System Flux |
560lm (±5%) |
| CRI |
>90 |
| Light Distribution |
Down |
| Driver Included |
Yes |
| Constant Voltage Output |
48V |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
7W (±5%) |
| Input Voltage |
200-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life |
30000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How much light does it give?
It produces 560 lumens from 7W, concentrated into a narrow 24 degree beam, so the pool of light is bright and well defined rather than spread thinly across a room.
What size is the fitting?
The body measures 50mm across and 110mm long, and it weighs 0.21kg.
Can it be dimmed?
No. It runs at full output only, so pair it with a standard switch rather than a dimmer.
Will colours look true under it?
Yes. The LED has a colour rendering index above 90, which keeps paint, artwork, timber and fabric looking natural.
How long should the LED last?
It is rated at an average 30,000 hours, and the driver needed to run it is supplied with the spot.
Is it suitable for a bathroom or outside?
No. It is rated for dry, sheltered rooms indoors, so keep it away from splashes and from anywhere exposed to weather.