Tiffany Frog Table Lamp Hand-Cut Stained Glass - Vintage Bronze

The Quoizel Tiffany Frog is a 220mm-wide table lamp built from individual pieces of hand-cut stained glass in tonal greens, soldered together to form a three-dimensional frog shape set on a vintage bronze base. Each glass segment is selected for colour variation, creating depth from emerald through lime to pale mint across the body, legs and lily-pad base. An integrated 3W LED G9 bulb inside the glass body casts warm 3000K light through the assembled panels, highlighting the soldered seams and tonal shifts between pieces.

Designed as accent lighting rather than primary illumination, the lamp suits bedside tables, console tables in hallways, shelving units in studies, and bathroom vanity counters where low-level ambient light is needed alongside a decorative object. The 228mm projection from front to back (including the extended rear legs and lily pad) requires clearance from the wall if positioned on a narrow console. The 132mm overall height sits below typical eye level when placed on a standard bedside table or desk, keeping the light source non-intrusive.

The frog form is positioned in a resting pose, with front legs tucked and rear legs folded beneath the body. The vintage bronze finish on the metal base and internal armature provides structural support for the glass assembly while adding weight to stabilise the 220mm footprint. The soldering technique used to join the glass pieces follows traditional Tiffany methods, with copper foil wrapped around each cut edge before being joined with lead-free solder, giving the characteristic raised seam lines visible when the lamp is unlit.

Each lamp shows variation in glass tone and grain depending on where individual pieces were cut from the original sheet stock. The green shades range from deep bottle green to translucent lime, with some segments showing streaked or mottled patterns within a single piece. This variability is a feature of hand-cut stained glass rather than a defect, meaning no two lamps are visually identical when illuminated.

Is the bulb replaceable?

Yes. The lamp uses a standard G9 LED bulb rated at 3W and 3000K. The bulb is accessed from underneath the bronze base. A replacement bulb is included with the lamp at purchase.

Can the lamp be used in a bathroom?

The lamp carries no IP rating and is designed for dry indoor use only. It can be used on a bathroom vanity counter away from direct water contact, but should not be placed within splash zones or areas subject to high humidity condensation.

How is the stained glass cleaned?

Wipe gently with a dry microfibre cloth to remove dust from the glass surface and soldered seams. For fingerprints or marks, a barely-damp cloth is acceptable, but avoid soaking the solder lines or allowing water to pool in the crevices between glass segments. Do not use glass cleaners, sprays or polishes on Tiffany-style stained glass.

Does the glass colour vary between lamps?

Yes. Each lamp is assembled from hand-cut stained glass segments, and the exact tone, grain and translucency of individual pieces vary depending on where they were cut from the original sheet. This is a feature of traditional Tiffany construction, not a defect.