TIBERI PRO 30W Surface Downlight Mains 90 deg (30W) Ø170 Cool White - White

The TIBERI PRO is a surface-mounted round downlight that draws 30W from a 220-240V AC mains supply and puts out 2200 lumens at a cool white 4000K tone. Across the Atlantic this style of fitting sits in the recessed can light family, though this version mounts onto the ceiling face rather than dropping into a hole, so it works where there is no void above. The wide 90 degree beam spreads light evenly rather than throwing a tight spot, and a Ra 90 colour rendering keeps skin tones and finishes looking true.

With 2200 lumens behind it, a single unit covers around 7 m² at general lighting levels, which makes it a sensible choice for a kitchen, utility room, hallway or landing where one fitting needs to do the work. The cool white tone reads as a crisp, alert light that suits task areas and bathrooms over a warmer living-room glow. Its IP54 rating means it copes with splashes and damp air, so it can also go in bathroom zones away from direct spray and in sheltered outdoor spots such as a porch or carport soffit. Keep it clear of fully exposed positions and direct water jets, where a higher-rated fitting would be needed.

Built from aluminium alloy in a white finish, the body measures Ø170 by 113 mm and weighs 1.09 kg, with the depth carried below the ceiline line as a surface fitting rather than buried in a void. It runs direct from mains voltage, so no separate transformer is needed, and it is a non-dimmable fixture that holds a fixed output. The integrated LED is rated for 50,000 hours, and the surface design fixes flat to the ceiling with no cut-out required. The wider TIBERI PRO range carries other wattages and beam options for matching a scheme across rooms.

Is this downlight dimmable?

No, the TIBERI PRO 30W is a non-dimmable fitting and holds a fixed 2200 lumen output. It is not designed to work with a dimmer switch or trailing-edge controller, so pair it with a standard switched circuit.

Does it need a cut-out hole in the ceiling?

No. This is a surface-mounted downlight, so it fixes flat against the ceiling face and needs no recess or cut-out. That makes it ideal where there is a concrete soffit or no void above the plasterboard for a recessed fitting to sit in.

Can it be used in a bathroom or outdoors?

Its IP54 rating means it resists splashes and damp air, so it suits bathroom zones away from direct spray and sheltered outdoor spots like a porch or carport. Keep it out of fully exposed positions and clear of direct water jets, where a higher IP rating is required.

How do I clean it?

Wipe the white aluminium body and the lens with a soft, slightly damp cloth, with the power off and the fitting cool. Avoid abrasive pads or solvents, which can dull the finish over time.