Description
The TIBERI PRO is a round surface-mounted LED downlight running 20W direct from 220-240V AC mains, putting out 2200 lumens at a 4000K cool white tone with a wide 115 degree beam. Across the Atlantic a fitting like this sits in the recessed can light family, though here it mounts onto the ceiling surface rather than dropping into a cut-out hole, so there is no recess to prepare. With a 90 CRI rating colours stay true and natural under the light, and the broad spread keeps the coverage even rather than tightly focused.
At 2200 lumens this single unit covers around 7 m² at general lighting levels, which makes it a sensible choice for a hallway, landing, utility room or a small kitchen where a flush ceiling fixture is wanted without cutting into the plasterboard. The 115 degree beam washes the area widely, so spacing a few across a larger room gives an even result. With its IP54 rating it copes with splashes and sheltered damp, suiting bathroom zones away from direct spray and covered outdoor spots such as a porch or carport, though it should not be used in fully-exposed positions or where it would meet direct water jets.
Built from aluminium alloy in a white finish, the body measures Ø170 × 113 mm and weighs 1.09 kg, surface-fixing flat to the ceiling without a separate driver to position. It is not dimmable, so pair it with a standard switched circuit, and the rated 50,000 hour lifespan keeps replacement intervals long. The TIBERI PRO range also includes other wattages and round formats for matching a fit-out across several rooms.
Specification
| Power |
20W |
| Voltage |
220-240 AC |
| Luminous flux |
2200 lm |
| Efficiency |
110 lm/W |
| Colour temperature |
4000K |
| Colour rendering (CRI) |
Ra 90 |
| Beam angle |
115° |
| IP rating |
IP54 |
| Dimmable |
No |
| Mounting |
Ceiling Mounted |
| Lifespan |
50,000 hours |
| Shape |
Round |
| Dimensions |
Ø170 × 113 mm |
| Weight |
1.09 kg |
| Material |
Aluminium Alloy |
| Finish |
White |
Downloads
Frequently Asked
Is this downlight recessed or surface mounted?
It is surface mounted, fixing flat onto the ceiling rather than dropping into a cut-out hole. This means there is no recess to cut and it suits ceilings where there is little void above, such as concrete or shallow plasterboard.
Can it be used in a bathroom or outdoors?
Its IP54 rating makes it splash-resistant and suitable for bathroom zones away from direct spray, plus sheltered outdoor spots like a porch or carport. Keep it out of fully-exposed positions, direct water jets or anywhere it could be submerged.
How many do I need for a room?
Each unit gives around 7 m² of coverage at general lighting levels from its 2200 lumens. For a typical kitchen or larger living space, plan two or three spaced evenly across the ceiling so the 115 degree beam overlaps for a uniform spread.
How do I clean the fitting?
Wipe the white aluminium body and lens with a soft, dry or barely damp cloth once the light is off and cool. Avoid abrasive pads and solvents, which can dull the finish and mark the diffuser over time.