Description
The TIBERI is a round recessed downlight running up to 21W and pushing out around 2090 to 2310 lumens depending on the chosen tone. It is colour selectable across 3000K, 3500K and 4000K, so the same fitting moves from a warm domestic glow to a brighter neutral white. American buyers will know this format as a recessed can light, dropped flush into the ceiling line. A wide 90 degree beam spreads light evenly rather than throwing a tight pool, which makes it well suited to general room illumination.
Around 7 to 8 m² at general lighting levels sits within the reach of a single unit, so a small bathroom, hallway or compact bedroom is comfortably covered by one or two. With its IP44 rating the TIBERI is happy in bathroom zones and under covered, sheltered spots such as a porch or carport, though it should be kept clear of direct water jets and fully exposed positions. The slim 36 mm depth means it tucks neatly above the ceiling, and the recessed body can also be set into a wall where the cut-out depth allows.
Built from aluminium alloy with a black finish, the TIBERI measures Ø185 mm and weighs a light 260 g. The high Ra 90 colour rendering keeps skin tones and surfaces looking natural, which is useful in a bathroom or task area. It is a non-dimmable fitting with a rated life of 50,000 hours, and the colour temperature is set at install rather than via a switch. The wider TIBERI range offers further sizes and finishes for matching a run of downlights across a space.
Specification
| Power |
max 21W |
| Luminous flux |
2090/2310/2220 lm |
| Colour temperature |
3000/3500/4000K |
| Colour rendering (CRI) |
Ra 90 |
| Beam angle |
90° |
| IP rating |
IP44/20 |
| Dimmable |
No |
| Mounting |
Recessed Mount In The Ceiling, Recessed Mount In The Wall |
| Lifespan |
50,000 hours |
| Shape |
Round |
| Dimensions |
Ø185 × 36 mm |
| Weight |
260 g |
| Material |
Aluminium Alloy |
| Finish |
Black |
Downloads
Product Specification Sheet
Range Datasheet
Frequently Asked
What size cut-out hole do I need?
The TIBERI has an overall trim diameter of Ø185 mm, so the recessed cut-out in the ceiling sits just inside that to let the fitting drop in flush. Always confirm the exact cut-out against the supplied spec sheet before drilling, as the cut-out is smaller than the visible trim. Allow the 36 mm body depth in the void above as well.
How do I set the colour temperature?
This downlight is colour selectable across 3000K, 3500K and 4000K, chosen at the point of installation rather than adjusted later. That lets you pick a warm white for a relaxed room or a brighter neutral white for a task space. Once set, the tone stays fixed for that fitting.
Can it be used in a bathroom?
Yes, the IP44 rating means it resists splashes and suits bathroom zones away from direct spray, as well as covered outdoor spots like a porch. It is not rated for fully exposed positions, direct water jets or submersion, so keep it clear of those. For wet locations check the relevant bathroom zone requirements.
How many do I need for a room?
A single TIBERI covers roughly 7 to 8 m² at general lighting levels, so a small bathroom or hallway is fine with one or two units. For larger rooms space several evenly to avoid dark patches, allowing for the wide 90 degree beam spread. The high 2090 lumen output per fitting means fewer are needed than with dimmer downlights.