Description
Ultra slim and round, this is a small recessed light with a frosted acrylic face held in a matt white surround. The diffuser spreads light widely, so you get a soft general glow rather than a hard beam. The LED is built in and the driver comes with it, and the output is cool white: clean and a little brisk, good where you want to see clearly. It draws 6W and gives 540 lumens. There is no dimming, so a plain on/off switch is all it asks for.
An 80mm cut-out keeps it modest, and lights this size are ones we reach for in hallways, landings, cloakrooms and rooms with a low ceiling. We would run a line of them along a corridor, or space a few across a utility room or a walk-in wardrobe where a pendant would only be in the way. Cool white suits working spaces, kitchen runs, home offices and garages, better than it suits a sitting room, where warmer light tends to read more comfortably. Keep it to dry rooms indoors, away from shower zones and anywhere steam or splashes reach.
The frosted acrylic face sits in a matt white finish that stays quiet against a plain ceiling. Bright white shows dust, so wipe the face occasionally with a barely damp cloth and dry it off; nothing abrasive, as acrylic scuffs easily. Kill the power at the switch before you start. It carries a three year warranty. The rest of the Saona range is surface flush fittings, round and square, in a spread of larger sizes and in warm white as well as cool, so the same plain white disc can carry through the house. The LED is fixed in place, so there is no lamp to change.
Specification
| Colour |
Matt White |
| Ceiling Mountable |
Yes |
| Recessable |
Yes |
| Weight |
0.14KG |
| Diameter |
90mm |
| Height |
25mm |
| Cut Out |
80mm |
| Materials Used |
Aluminium, Acrylic |
| Energy Class |
F |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
F |
| Min Energy Class |
F |
| Lamp |
1 x 6W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
4000K Cool White (±5%) |
| Number of Switching Cycles |
30000 |
| Average Life of LED |
20000hrs |
| LED Brand |
Epistar |
| Qty of SMD |
30 |
| SMD Chipset |
4014 |
| LED Power |
0.2W (±5%) |
| Type of LED |
SMD |
| Lumens per LED |
24-26lm |
| Lumens per Watt (lm/W) |
90lm/W (±5%) |
| Beam Angle |
113° |
| System Flux |
540lm (±5%) |
| CRI |
=80 |
| Light Distribution |
Down |
| Driver Included |
Yes |
| Type of Driver |
Constant Current |
| Constant Current Output |
240mA |
| Min/Max. Voltage Output |
16-25V |
| Load Range |
6W |
| Ta |
50°C |
| Tc |
85°C |
| Casing Material |
Aluminium |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
6W (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life |
30000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| TUV |
Yes |
| EMV/EMC |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size hole does it need?
The cut-out is 80mm. The visible trim measures 90mm across, so it covers the opening with a small margin all round.
How deep is the fitting?
It stands 25mm from front to back, which is why it is described as ultra slim.
Can I put it on a dimmer?
No. It is non-dimmable and should be run from a standard on/off switch.
How bright is it, and what shade of white?
It produces 540 lumens at 6W, in 4000K cool white, with a wide spread of light rather than a narrow beam.
Is it suitable for a bathroom or shower area?
No. It is rated IP20, so it belongs in dry indoor rooms only.
Does it need a separate driver?
No, the driver is supplied with the light, and the fitting is Class 2 double insulated.