Description
A small round recessed light with a slim body and a matt white rim, finished with a frosted acrylic face that softens the light before it leaves the fitting. The LED sits behind that diffuser rather than showing as a bright point, so the glow spreads wide and even instead of drawing the eye. It draws 6W, gives a warm white light of roughly 520 lumens, and needs an 80mm cut-out. The driver comes with it.
This is the sort of light we reach for when a room needs even, background brightness and nothing hanging from the ceiling: hallways, landings, a run along a kitchen ceiling, a dressing area, or a low room where headroom matters. The shallow body suits ceilings with little space above them. Output is fixed rather than adjustable, so it works best on a normal wall switch, and it suits dry rooms indoors rather than anywhere damp or exposed. Several in a line or a grid give a calmer result than one on its own.
The rim is painted a flat white with no shine to catch the light, and the diffuser is acrylic rather than glass, which keeps the whole thing light in the hand. To clean it, turn the power off at the switch, let it cool, then wipe the face with a soft dry cloth; if it needs more, a barely damp cloth is fine, but keep solvents and abrasive creams away from the acrylic. It carries a three year warranty. The wider Saona range runs on into surface flush fittings for ceilings where nothing can be recessed, in both round and square shapes and in a spread of sizes, all in the same matt white and frosted acrylic, so a house can be lit consistently whether the ceiling takes a recessed fitting or not. The LED is built in, so there is no lamp to buy.
Specification
| Colour |
Matt White |
| Ceiling Mountable |
Yes |
| Recessable |
Yes |
| Weight |
0.14KG |
| Diameter |
90mm |
| Height |
25mm |
| Cut Out |
80mm |
| Materials Used |
Aluminium, Acrylic |
| Energy Class |
F |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
F |
| Min Energy Class |
F |
| Lamp |
1 x 6W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| Number of Switching Cycles |
30000 |
| Average Life of LED |
20000hrs |
| LED Brand |
Epistar |
| Qty of SMD |
30 |
| SMD Chipset |
4014 |
| LED Power |
0.2W (±5%) |
| Type of LED |
SMD |
| Lumens per LED |
24-26lm |
| Lumens per Watt (lm/W) |
87lm/W (±5%) |
| Beam Angle |
113° |
| System Flux |
520lm (±5%) |
| CRI |
>80 |
| Light Distribution |
Down |
| Driver Included |
Yes |
| Type of Driver |
Constant Current |
| Constant Current Output |
240mA |
| Min/Max. Voltage Output |
16-25V |
| Load Range |
6W |
| Ta |
50°C |
| Tc |
85°C |
| Casing Material |
Aluminium |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
6W (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life |
30000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| TUV |
Yes |
| EMV/EMC |
Yes |
| Number of Shades |
1 |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size hole does it need?
An 80mm cut-out. The visible face measures 90mm across, so the rim covers the edge of the aperture neatly.
How deep is the fitting?
It is 25mm high, which is why it suits ceilings with a shallow void.
Can I dim it?
No, this one is not dimmable. It should be run from a standard on/off switch rather than a dimmer.
What colour is the light?
Warm white, at 3000K, which reads soft and slightly golden against white ceilings and plain walls.
Is a driver included?
Yes, the driver is supplied with the downlight.
What is the diffuser made of?
Frosted acrylic, held in a matt white painted rim. Clean it with a soft dry cloth and avoid solvent-based cleaners.