Description
A slim round profile sits close to the ceiling line here, with a matt white rim around a frosted acrylic face that spreads light evenly rather than punching out a hard bright spot. The LED is integral and its driver is supplied, drawing 12W and putting out 990 lumens of warm white light. It is not dimmable, so it belongs on a plain switched circuit rather than a dimmer.
We would use this for general light in hallways, landings, kitchens and home offices, where you want the ceiling to stay quiet and the room lit right into the corners. The wide spread means several of them, spaced across a ceiling, give steadier cover than one central fitting, and the 130mm cut-out is a familiar size if you are swapping out older recessed lights. It suits anyone after plain, even ambient light rather than accent beams aimed at pictures or worktops. It is intended for dry indoor rooms, so keep it away from shower zones and anywhere open to weather.
The frame and diffuser are acrylic, finished in matt white so the fitting reads as part of the ceiling rather than a piece of hardware. Switch off at the wall and wipe the frosted face with a barely damp cloth; acrylic marks under solvents and abrasive cleaners, so leave those in the cupboard. It carries a three year warranty. We stock the wider Saona range as surface flush fittings too, round or square, if you would rather sit the light on the ceiling than set it into it. The LED here is permanent, so there is no lamp to change and no bulb to buy.
Specification
| Colour |
Matt White |
| Ceiling Mountable |
Yes |
| Recessable |
Yes |
| Weight |
0.32KG |
| Diameter |
145mm |
| Height |
25mm |
| Cut Out |
130mm |
| Materials Used |
Aluminium, Acrylic |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 12W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| Number of Switching Cycles |
30000 |
| Average Life of LED |
20000hrs |
| LED Brand |
Epistar |
| Qty of SMD |
60 |
| SMD Chipset |
4014 |
| LED Power |
0.2W (±5%) |
| Type of LED |
SMD |
| Lumens per LED |
26-28lm |
| Lumens per Watt (lm/W) |
82lm/W (±5%) |
| Beam Angle |
113° |
| System Flux |
990lm (±5%) |
| CRI |
>80 |
| Light Distribution |
Down |
| Driver Included |
Yes |
| Type of Driver |
Constant Current |
| Constant Current Output |
300mA |
| Min/Max. Voltage Output |
24-42V |
| Load Range |
12W |
| Ta |
50°C |
| Tc |
85°C |
| Casing Material |
Aluminium |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
12W (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life |
30000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| TUV |
Yes |
| EMV/EMC |
Yes |
| Number of Shades |
1 |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size hole does it need, and how deep is it?
The cut-out is 130mm. The fitting measures 145mm across the visible face and is just 25mm deep, which is why it is described as ultra slim.
Can it be dimmed?
No. It is a non-dimmable fitting and should be run from a standard on/off switch.
What shade of white is the light?
3000K warm white, a soft yellow-white that sits comfortably in living rooms, bedrooms and hallways.
Do I need to buy a driver?
No, the driver is included with the fitting.
Is it suitable for a bathroom?
It is rated IP20, so it is for dry rooms only and not for use in bathroom zones.
How should I clean the acrylic face?
Turn the light off, let it cool, then wipe with a soft cloth just barely dampened with water. Avoid solvents, alcohol wipes and cream cleaners, as these can haze acrylic.