Reflek Outdoor LED Linear Wall Light 20W 3000K - Black, 144cm

The Reflek is a 1440mm outdoor LED linear wall light with an integrated 20W 3000K LED housed in a powder-coated black aluminium body. The fitting produces indirect light through glass diffusers along its length, casting warm white illumination up and down the wall rather than directly forward. The IP54 rating provides protection against water splashes and dust ingress suitable for exposed outdoor locations.

Designed for large-scale outdoor wall mounting, the 1440mm length suits expansive walls on modern residential properties, commercial buildings, hospitality exteriors and garden boundary walls where continuous linear light is needed across 1.4m or more. The 50mm projection from the wall keeps the profile shallow enough for walkways and terraces where head clearance matters. The indirect lighting avoids glare, making the fitting suitable for positions at eye level or above where direct light would cause discomfort.

The powder-coated aluminium body resists corrosion and UV degradation in typical UK weather conditions. The black finish sits comfortably on contemporary rendered facades, brick walls, timber cladding and concrete surfaces. The glass diffusers spread the 20W LED output evenly along the 1440mm length, avoiding the hot-spot effect common with shorter linear fittings. The 3000K colour temperature produces warm white light that complements exterior brick, stone and wood tones without the clinical appearance of cooler LEDs.

What does the IP54 rating mean for outdoor use?

IP54 means the fitting is protected against dust ingress (rating 5) and water splashes from any direction (rating 4). This makes it suitable for exposed outdoor walls, covered terraces and building facades, but it should not be installed where it will be directly submerged or subjected to high-pressure water jets.

Is the LED replaceable?

The LED is integrated into the fitting and is not user-replaceable. The 20W LED has a typical lifespan of 25,000-30,000 hours, equivalent to approximately 10-15 years of typical outdoor use at 5-6 hours per night.

Can it be dimmed?

No. The integrated driver does not support dimming. The fitting operates at full 20W output when switched on.

How is it mounted?

The fitting mounts to the wall via a backplate with fixings appropriate to the wall material (brick, block, render, timber cladding). The 50mm projection includes the mounting hardware. Installation should be carried out by a qualified electrician and the fitting must be wired to an outdoor-rated circuit with appropriate IP-rated junction boxes or waterproof cable glands.