Description
The Pamela is an 80x120cm canvas wall art piece combining a high-contrast fashion portrait with an integrated LED strip that traces the silhouette of a wide-brimmed hat. The canvas is printed on textile, mounted to a rigid board backing, and set within a 4cm-deep black timber frame. The LED strip runs along the curved outline of the hat brim, emitting warm-white light that creates a halo effect against the dark background.
Designed for bedrooms, hallways, entryways and lounge walls where ambient accent lighting is wanted alongside wall art, the Pamela functions as both a decorative piece and a low-level light source. The LED operates on mains power via a rear-mounted transformer and cable (installation typically requires a nearby socket or in-wall wiring to a switched spur). The 80x120cm format suits wall spaces of 2.4m height or above, positioned centrally above a console, headboard or sideboard.
The black frame and monochrome print suit contemporary, minimalist and industrial interiors where high-contrast accent pieces are used to anchor a neutral palette. The canvas print itself shows a woman in a black dress beneath an oversized sun hat, with the LED outline creating depth and drawing the eye to the composition's silhouette rather than fine detail. The 5kg weight requires secure wall fixings — two D-rings or keyhole mounts on the rear allow hanging from picture hooks rated to the combined load.
Schuller is a Spanish lighting and decorative art manufacturer producing LED-integrated wall art, mirrors and accent pieces for residential and hospitality interiors across Europe.
Specification
| Width |
80cm |
| Height |
120cm |
| Depth |
4cm |
| Weight |
5kg |
| Finish |
Printed, Black |
Downloads
Product Specification Sheet
Frequently Asked
How is the LED powered?
The LED strip connects to a rear-mounted transformer that requires a mains socket or hardwired spur. The cable exits from the back of the frame, so installation near a power source or behind furniture that conceals the cable is recommended.
Is the LED dimmable?
The specification sheet linked above will confirm dimmer compatibility. Most Schuller LED wall art pieces use non-dimmable drivers unless stated otherwise — check before pairing with a dimmer switch.
What wall fixings are needed?
The 5kg weight requires wall fixings rated to at least 10kg to provide a safety margin. Two heavy-duty picture hooks into wall plugs, or two screws into timber studs, are sufficient. The rear of the frame has hanging points compatible with standard picture wire or keyhole mounts.
Can it be used in a bathroom?
No IP rating is listed, so the Pamela is designed for dry indoor use only. Bathrooms with high humidity or direct water exposure are not suitable.