Organic Oversized Leaner Mirror Oak Wood Frame - 150x86cm

This 150cm leaner mirror has an asymmetric organic form with a gilded oak wood frame and a 6cm deep corrugated metallic surround finished in bronze. The mirror tapers from a rounded top to a narrower base, creating a naturally flowing silhouette that departs from rectangular and arched mirror conventions. Two metal eyelets on the back allow the mirror to be hung on a wall or leaned against it, depending on the room layout and available floor space.

Designed for hallways, bedrooms and dressing areas where a full-height reflection is needed, the 150x86cm footprint suits walls with sufficient floor clearance for the base to rest approximately 10-15cm forward from the skirting. When leaned, the mirror sits at a slight backward angle, preventing it from tipping forward. When wall-hung, the eyelets distribute the 24kg weight across two fixings, so secure wall anchors rated for heavy loads are required.

The oak wood frame carries a gilded finish that lightens the natural grain and pairs the bronze metallic surround with warmer wood tones rather than raw timber. The corrugated metallic section has a shallow ribbed texture that catches light at different angles throughout the day, adding depth to the frame without introducing colour variation. The asymmetric outline works in contemporary and transitional interiors where organic forms balance sharper furniture lines.

At 24.35kg, the mirror requires two people for safe handling during installation. The frame depth of 6cm means the mirror projects slightly from the wall when hung, creating a shadow gap that separates it visually from the surface behind. The bronze finish on the metallic surround has a subtle warmth that complements neutral walls, off-whites and warm greys without clashing with cooler tones.

Can this mirror be leaned or does it need to be wall-hung?

Both options work. The mirror has two metal eyelets on the back for wall-hanging, but the form is designed to lean against a wall with the base resting on the floor. When leaning, ensure the wall surface is flat and the floor allows the base to sit approximately 10-15cm forward from the skirting.

What fixings are needed for wall-hanging?

The mirror weighs 24.35kg, so two heavy-duty wall anchors rated for at least 15kg each are required. The type of fixing depends on your wall construction — masonry walls need expanding anchors or resin fixings, stud walls need fixings that locate the timber frame behind the plasterboard.

What is the corrugated metallic section made from?

The specification lists the material code as 37, which typically refers to a metal composite or coated metal in Libra Interiors' cataloguing system. The finish is bronze with a shallow ribbed texture.

Does the gilded oak finish vary between pieces?

Oak is a natural wood, so grain patterns differ between individual frames. The gilded finish lightens and unifies the wood tone, but some variation in grain density and figure is normal and part of the material character.