Description
The Orane is a 63cm circular LED suspension light built from steel and brushed aluminium with an anodic gold finish and an opal silicone diffuser. An integrated 47W LED array running at 3000K sits within the ring, casting warm ambient light downward and outward through the opal diffuser. The suspension height adjusts manually from 80cm to 140cm using a central ball mechanism on the cable, allowing the ring to be positioned over a dining table, kitchen island or in an open-plan living area.
Designed for residential dining rooms, kitchen islands and lounge settings where both ambient and decorative lighting are needed, the Orane pairs a minimalist ring form with functional dimming control. The included TRIAC driver and dimming set allow brightness adjustment via a compatible wall dimmer, giving control over light output from full 47W down to low-level mood lighting. The IP20 rating suits dry indoor locations only.
The anodic gold finish provides a warm metallic accent that pairs with brass hardware, timber finishes and warm-toned contemporary interiors. The opal diffuser softens the LED output and prevents direct glare from the diodes, making the light comfortable for eye-level viewing when positioned over a table. At 3.3kg the fitting requires secure ceiling fixing into a joist or ceiling anchor rated for the weight. The 63cm ring diameter suits rooms with floor areas of 12-18m² without dominating smaller spaces.
The central sphere acts as both the height-adjustment mechanism and a visual anchor point below the ring. To adjust the suspension height, the sphere is repositioned along the cable run before installation, locking the cable at the desired length. Once installed, the height remains fixed unless the fitting is taken down and readjusted. The 3000K colour temperature produces warm white light similar to halogen, suitable for living and dining areas where cooler daylight tones would feel clinical.
Specification
| Height |
80cm |
| Dimension |
63cm |
| Minimum Height |
80cm |
| Maximum Height |
140cm |
| Weight |
3.3kg |
| Energy Class |
G |
| IP |
IP20 |
| Electric Class |
Class 1 |
| Power |
47W |
| Voltage |
180/240V |
| Frequency |
47/63Hz |
| Lumen |
3.4lm |
| Colour Temperature |
3000K |
| CRI |
>80 |
| Finish |
Gold, Opal |
Downloads
Product Specification Sheet
Assembly Instruction
Frequently Asked
Is the Orane dimmable?
Yes. The Orane includes a TRIAC driver and dimming set, making it compatible with most TRIAC-compatible wall dimmers. Dimmer performance varies by model, so confirm compatibility with your specific dimmer before installation.
How is the suspension height adjusted?
The central gold sphere on the cable acts as the height-adjustment mechanism. Before installation, the sphere is repositioned along the cable to lock the suspension at the desired height between 80cm and 140cm. Once installed, the height remains fixed unless the fitting is removed and readjusted.
What ceiling height is needed?
With a minimum suspension height of 80cm, the Orane suits rooms with ceiling heights of 2.4m or above when positioned over a table or surface. For higher ceilings up to 3m, the suspension can be extended to 140cm to maintain appropriate clearance above the surface.
Can it be used in bathrooms?
No. The IP20 rating limits the Orane to dry indoor locations only. It is not suitable for bathrooms, wet rooms or outdoor use where moisture or splashing may occur.