Description
This is one of the smallest recessed spotlights we sell, a round white trim just 50mm across with a swivel head set into it. The head tilts within the housing, so light can be angled onto a shelf, a picture or a run of worktop rather than only dropping straight down. The LED is built in and runs at a warm 2700K, close in colour to an old filament lamp, and the driver it needs comes with it. It is not dimmable, so it is best wired to a plain switch.
We reach for these where a full size downlight would look heavy: shallow alcoves, display niches, the underside of a run of cabinets, a stair landing, or a narrow hallway where several small points of light read better than one broad one. The beam is tight and controlled, which makes it good for lighting a single object rather than a whole room, so most people use them in groups. They suit anyone who wants the light noticed and the fitting not. Wired into an ordinary household lighting circuit, it is meant for dry rooms indoors, well away from splashes and steam.
The body and trim carry a clean white finish that sits quietly against a painted ceiling, and the fitting itself weighs next to nothing. Because the LED is integral there is no lamp to swap; dust is the only thing to keep on top of, so switch the power off and wipe the visible rim with a barely damp cloth, leaving the aperture alone. It carries a three year warranty. We stock the same fitting in black, and in cooler whites if you want a crisper light, which makes it easy to keep one warmth of light through a house while changing finish where the ceiling colour changes.
Specification
| Colour |
White |
| Weight |
0.09KG |
| Diameter |
50mm |
| Height |
30mm |
| Cut Out |
42mm |
| Materials Used |
Aluminium |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 3W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
2700K Warm White (±5%) |
| Number of Switching Cycles |
30000 |
| Average Life of LED |
30000hrs |
| LED Brand |
OSRAM |
| SMD Chipset |
3030 |
| LED Power |
3W (±5%) |
| Type of LED |
SMD |
| Lumens per Watt (lm/W) |
70lm/W (±5%) |
| Beam Angle |
40° |
| System Flux |
210lm (±5%) |
| CRI |
>90 |
| Light Distribution |
Down |
| Driver Included |
Yes |
| Type of Driver |
Constant Current |
| Constant Current Output |
700mA |
| Min/Max. Voltage Output |
2.5-4V |
| Load Range |
2.8W |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
3W (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life |
30000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How big an opening does it need?
The cut out is 42mm, with the fitting measuring 50mm across the visible trim and 30mm deep behind it.
How much light does one give?
Around 210 lumens at 2700K warm white, with a colour rendering index above 90, so colours and skin tones stay true.
Can it be dimmed?
No. This version is non dimmable and should be run from a standard on/off switch rather than a dimmer.
Do I need a separate transformer or driver?
No, the driver is supplied with the spotlight.
How long should the LED last?
It is rated at 30,000 hours of average life, and the product carries a three year warranty.
Is it suitable for a bathroom or outside?
No. It is rated IP20, so keep it to dry indoor rooms.