Description
This is the corner piece for the Magneto recessed range, a compact L shaped joint that turns a straight run of track through a right angle. The body is square, roughly 11cm on each side, and it is finished in black to sit quietly against the track it joins. It holds no lamp of its own; it is a fitting-out part, there to give the run its shape. We keep it alongside the recessed track itself, so a corner can be planned in from the start rather than worked around later.
It earns its place wherever a single line of light will not do. Kitchens are the usual case: track above the worktop that needs to carry on round to the island or the far wall. Hallways that meet at a corner, galleries and display shelving, and open-plan rooms where the lighting follows the plan of the space all ask for the same turn. It suits anyone building a run to fit the room rather than accepting a straight length and hoping the light reaches.
The finish is a flat black across a small housing, and the low profile keeps the joint in proportion with the recessed sections either side. Keeping it clean is a matter of a dry brush or cloth over the visible edge now and then, with the power off at the switch. It carries a three year warranty. Within the range there are also wall to wall joints, inside and outside, for the same recessed track, along with 1m lengths of that track, a driver and a dimmable controller. Black throughout, so a run reads as one piece.
Specification
| Colour |
Black |
| Weight |
0.26KG |
| Length |
110mm |
| Width |
110mm |
| Height |
57mm |
| Materials Used |
Aluminium |
| Lamp Cap |
Non-Electric |
| IP Rating |
IP20 |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| TUV |
Yes |
| EMV/EMC |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
Which track is this joint made for?
It is made for the Magneto recessed track, references M8307 and M8308. It is not intended for the shallow or deep surface tracks, which have their own joints.
Does it take a lamp?
No. It is a non-electrical part of the system, with no lamp holder of its own. The light comes from the heads you choose for the run.
How much room does the corner take up?
The joint measures 110mm by 110mm, with a height of 57mm, so allow that much space where the two track runs meet.
What angle does it turn through?
It turns the run through 90 degrees, giving a clean right angled corner.
What is the finish, and how should it be cleaned?
It is black, matching the rest of the Magneto parts. Wipe the visible face with a dry cloth; avoid sprays and household cleaners on the finish.
Is it suitable for a bathroom or outdoors?
No. It is rated IP20 and belongs in dry indoor rooms such as kitchens, hallways and living spaces.