Description
A flush fitting for rooms where headroom is short and a hanging light would only get in the way. The shade is slim and gently curved, drawn into a soft trapezium profile, and it sits against a round polished chrome plate measuring 15cm across. In amber, the shade throws a honeyed light rather than a cold one, and unlit it reads as a small warm bead against bright metal. It takes an E27 lamp, so the light you get is very much yours to choose.
We would fit this in a hallway, a small landing, a cloakroom or a box room, and it earns its place under sloping eaves and on any ceiling where a pendant would be knocked. Because the shade is shallow, it suits a run of two or three along a corridor as much as it does a single point in the middle of a small room. It is dimmable if you pair a dimmable lamp with a compatible dimmer, neither of which comes with it. Keep the lamp within the 20W ceiling and choose one to suit the amber: a clear LED for sparkle, an opal one for a softer wash. It is intended for dry rooms indoors, so leave it out of shower zones.
The chrome is polished to a clear shine and the amber shade is fitted close to it, which keeps the whole thing compact. Switch off at the wall and let the lamp lose its heat before you touch anything; after that a dry duster keeps the chrome bright, and a barely damp cloth followed by a buff lifts fingerprints from the shade. It carries a one year warranty. We stock the same curved trapezium shade in clear and in chrome on this polished chrome plate, and there is an amber wine shade version if you prefer a taller silhouette. Lamps are not included.
Specification
| Colour |
Polished Chrome |
| Second Colour |
Amber |
| Weight |
1.00KG |
| Diameter |
150mm |
| Height |
90mm |
| Materials Used |
Iron, Steel,Glass |
| Adjustable Height |
No |
| Energy Class |
A++ to A |
| Max Energy Class |
A++ |
| Min Energy Class |
A |
| Lamp |
1 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED Lamp Dependant On Shade |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~ 50/60Hz |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Colour |
Amber |
| Plate Dimensions |
D:150mm x T:1.0mm |
| Shade Material |
Glass |
| Shade Included |
Yes |
| Number of Shades |
1 |
| Pieces Included |
1 |
| Unassembled |
Yes-Shade To Be Attached |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How far does it drop below the ceiling?
It stands 90mm from the ceiling, with a plate diameter of 150mm, so it stays tight to the surface in low rooms and hallways.
Which lamp should I use?
It takes a single E27 lamp up to 20W. An LED is the sensible choice here, and the shape you pick should suit the shade you can see through.
Can I put it on a dimmer?
Yes, provided you use a dimmable lamp with a dimmer that matches it. No dimmer is supplied.
What colours are the shade and the metalwork?
The shade is amber and the metalwork is polished chrome.
Is it suitable for a bathroom?
It is rated IP20, so it belongs in dry indoor rooms rather than in a bathroom zone where water may reach it.
How heavy is it?
It weighs 1kg.