Free Delivery on all orders over £99*

Knightsbridge 24DC75 75W 24V Constant Voltage LED Driver - Non-Dimmable

£2299
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge 24DC75 is a 75W constant voltage LED driver that converts 230V 50Hz mains input to 24V DC output for LED strip lighting, under-cabinet LED modules, and other 24V constant voltage LED installations. The driver provides up to 3.1A output current and includes captured terminal screws for secure wire connection without requiring terminal blocks.

Designed for concealed installation in ceilings, kitchen plinths, furniture voids and other accessible spaces, the driver measures 184mm × 61mm × 32mm and sits in typical joisted ceiling voids or behind kitchen kickboards. The IP20 rating limits it to dry indoor locations — it is not suitable for bathrooms, outdoor use, or anywhere subject to moisture ingress. The white polycarbonate housing provides electrical insulation and meets Class II requirements, meaning no earth connection is needed.

The driver includes built-in protection against open circuit, short circuit, overload and thermal overrun. If the LED load is disconnected, shorted, or draws excessive current, the driver cuts output until the fault is cleared. The thermal protection monitors internal temperature and reduces output if the driver overheats, preventing damage during abnormal operating conditions. The output is non-dimmable — pairing with a dimmer will either fail to dim or damage the driver.

The SELV (Safety Extra Low Voltage) output at 24V DC is considered safe to touch under normal conditions, though live 230V mains input must be isolated and terminated by a qualified electrician. The compact 184mm length suits most concealed installation spaces and the captured terminal screws accept solid or stranded conductors up to 2.5mm² without additional ferrules.

Specification
Length 184 mm
Height 32 mm
Width 61 mm
Construction Polycarbonate
Finish White
Class II
IP Rating IP20
Primary Voltage 230V 50Hz
Dimmable No
Driver Type Constant Voltage
Warranty 3
Downloads

Product Specification Sheet

Product Manual

Frequently Asked

Can this driver be used with dimmable LED strips?

No. The 24DC75 is a non-dimmable constant voltage driver. Attempting to dim the output by placing a dimmer on the mains input side will either fail to dim or damage the driver. For dimmable 24V installations, use a dimmable-rated driver model.

What is the maximum LED load this driver supports?

The driver delivers up to 75W at 24V DC, which equates to approximately 3.1A maximum output current. Total connected LED load must not exceed 75W. For LED strip, calculate total wattage by multiplying watts-per-metre by total run length.

Where can this driver be installed?

The IP20 rating limits installation to dry indoor locations with adequate ventilation. Suitable locations include ceiling voids, kitchen plinths, furniture cavities and cupboards. It must not be installed in bathrooms, outdoors, or anywhere subject to moisture or condensation.

Does it require an earth connection?

No. The driver is Class II double-insulated and does not require an earth connection. However, mains input wiring must be carried out by a qualified electrician and comply with current UK wiring regulations.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge 24DC75 is a 75W constant voltage LED driver that converts 230V 50Hz mains input to 24V DC output for LED strip lighting, under-cabinet LED modules, and other 24V constant voltage LED installations. The driver provides up to 3.1A output current and includes captured terminal screws for secure wire connection without requiring terminal blocks.

    Designed for concealed installation in ceilings, kitchen plinths, furniture voids and other accessible spaces, the driver measures 184mm × 61mm × 32mm and sits in typical joisted ceiling voids or behind kitchen kickboards. The IP20 rating limits it to dry indoor locations — it is not suitable for bathrooms, outdoor use, or anywhere subject to moisture ingress. The white polycarbonate housing provides electrical insulation and meets Class II requirements, meaning no earth connection is needed.

    The driver includes built-in protection against open circuit, short circuit, overload and thermal overrun. If the LED load is disconnected, shorted, or draws excessive current, the driver cuts output until the fault is cleared. The thermal protection monitors internal temperature and reduces output if the driver overheats, preventing damage during abnormal operating conditions. The output is non-dimmable — pairing with a dimmer will either fail to dim or damage the driver.

    The SELV (Safety Extra Low Voltage) output at 24V DC is considered safe to touch under normal conditions, though live 230V mains input must be isolated and terminated by a qualified electrician. The compact 184mm length suits most concealed installation spaces and the captured terminal screws accept solid or stranded conductors up to 2.5mm² without additional ferrules.

    Specification
    Length 184 mm
    Height 32 mm
    Width 61 mm
    Construction Polycarbonate
    Finish White
    Class II
    IP Rating IP20
    Primary Voltage 230V 50Hz
    Dimmable No
    Driver Type Constant Voltage
    Warranty 3
    Downloads

    Product Specification Sheet

    Product Manual

    Frequently Asked

    Can this driver be used with dimmable LED strips?

    No. The 24DC75 is a non-dimmable constant voltage driver. Attempting to dim the output by placing a dimmer on the mains input side will either fail to dim or damage the driver. For dimmable 24V installations, use a dimmable-rated driver model.

    What is the maximum LED load this driver supports?

    The driver delivers up to 75W at 24V DC, which equates to approximately 3.1A maximum output current. Total connected LED load must not exceed 75W. For LED strip, calculate total wattage by multiplying watts-per-metre by total run length.

    Where can this driver be installed?

    The IP20 rating limits installation to dry indoor locations with adequate ventilation. Suitable locations include ceiling voids, kitchen plinths, furniture cavities and cupboards. It must not be installed in bathrooms, outdoors, or anywhere subject to moisture or condensation.

    Does it require an earth connection?

    No. The driver is Class II double-insulated and does not require an earth connection. However, mains input wiring must be carried out by a qualified electrician and comply with current UK wiring regulations.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.