Description
A recessed spot that pulls back into the ceiling void and swivels, so the beam can be aimed without a body sitting proud of the ceiling line. The integrated LED draws 12W and gives a warm 2700K white, gentle in a living room and steady from the moment it strikes. Trim and inner cup are both black, which sinks the aperture into shadow and keeps glare away when you look up. It is not a dimming fitting, so a plain switch suits it best, and the driver is supplied with it.
We reach for this one where a fixed downlight would only wash the floor: over a worktop, along a run of shelving, on a stone chimney breast or a picture wall. The swivel lets you correct the aim later, once the furniture has settled. Cut in at 95mm, it works just as well as general light in hallways, landings and bedrooms, and the warm tone sits happily with plaster, oak and brass. We would keep it to dry rooms; a shower zone or a covered porch wants a fitting rated for moisture.
The black finish is carried across the visible trim and the tilting cup, so the fitting reads as one piece from below. Retracting the head into the recess hides most of the hardware and leaves a small, quiet circle on the ceiling. For care, take a dry cloth to the trim when the room gets a clean, and switch the circuit off before wiping the lens; there is nothing else to do. It carries a three year warranty. Warmer and cooler colour temperatures run through the range, along with a matt white and black version if the black feels too heavy overhead.
Specification
| Colour |
Black |
| Weight |
0.57KG |
| Diameter |
100mm |
| Height |
117mm |
| Cut Out |
95mm |
| Materials Used |
Aluminium, ABS |
| Energy Class |
F |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
F |
| Min Energy Class |
F |
| Lamp |
1 x 7W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
2700K Warm White (±5%) |
| Number of Switching Cycles |
30000 |
| Average Life of LED |
30000hrs |
| LED Brand |
CREE |
| SMD Chipset |
COB/12W |
| LED Power |
7W (±5%) |
| Type of LED |
COB |
| Lumens per Watt (lm/W) |
85lm/W (±5%) |
| Beam Angle |
35° |
| System Flux |
1020lm (±5%) |
| CRI |
=80 |
| Light Distribution |
Down |
| Driver Included |
Yes |
| Constant Current Output |
300mA |
| Min/Max. Voltage Output |
220-240V~50/60Hz |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
12W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life |
30000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| TUV |
Yes |
| EMV/EMC |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
Yes |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How much light does it give?
Around 1020 lumens of warm white at 2700K, from a 35 degree beam, so it reads as a defined pool rather than a broad wash.
What size hole does it need, and how deep does it sit?
The cut-out is 95mm, the visible diameter is 100mm and the body stands 117mm tall, so allow room above the ceiling for the full height.
Can I dim it?
No. It is a non-dimmable fitting, so pair it with a standard on/off switch rather than a dimmer plate.
Do I need to buy a lamp or a driver?
Neither. The LED is integrated and the driver is included, rated for around 30,000 hours of use.
Will it work in a bathroom?
It is rated IP20, so keep it to dry areas away from splashing and steam.
How far does the head move?
The head swivels and retracts within the housing, letting you angle the beam towards art, shelving or a worktop and then tuck it back in.