Duo LED Wall Light 10W 3000K - Black White Gold

The Duo is a 52cm vertical LED wall light built around two circular opal acrylic diffusers mounted on a slender gold-finished vertical bar. The upper diffuser is larger, backed by a matt white metal plate; the lower is smaller, backed by matt black. A single integrated 10W 3000K LED provides warm white light that glows through both opal spheres, creating a soft ambient wash on either side of the fitting.

Designed for hallways, staircases, living room feature walls and bedroom accent positions where vertical space can accommodate the 52cm height, the Duo works where a single point of illumination needs to read as a statement piece rather than purely functional lighting. The 6cm projection from the wall keeps the fitting close to the surface, making it suitable for narrower corridors where deeper fittings would intrude. The IP20 rating limits the Duo to dry indoor locations — it is not suitable for bathrooms, kitchens near sinks, or outdoor use.

The aluminium and metal construction gives the fitting a total weight of 1.18kg, requiring secure fixing to a wall with solid backing or suitable wall plugs. The gold bar runs the full 52cm height and acts as both the structural spine and the cable route, with the opal diffusers mounted at offset positions to create the asymmetric visual balance. The matt black and white finishes on the backing plates contrast with the warm gold tone of the central bar and pair with monochrome, contemporary and mid-century interiors.

Product Specification Sheet

Assembly Instruction

Is the Duo dimmable?

The integrated 10W LED runs on 220V mains. Dimmer compatibility depends on the specific dimmer model. Check with the dimmer manufacturer or contact us before pairing with a dimmer to confirm compatibility.

Can it be used in a bathroom?

No. The Duo carries an IP20 rating, meaning it is not protected against moisture ingress and must only be installed in dry indoor locations away from direct water contact or high humidity zones.

What wall fixings are needed?

The fitting weighs 1.18kg and requires secure fixing. On solid walls, standard wall plugs and screws are sufficient. On plasterboard or hollow walls, use appropriate plasterboard anchors rated for the weight. The assembly instruction PDF linked above provides fixing detail.

What room height suits the 52cm vertical design?

The Duo works best in rooms with standard or higher ceiling heights (2.4m+) where the 52cm vertical span can be appreciated. In lower-ceilinged rooms the fitting may read as disproportionately tall relative to the wall area.