Description
A small round spotlight with an integrated LED, finished in matt white so it reads quietly against a pale ceiling. The visible body measures 85mm across, and the light is cool white at 4000K, crisp rather than yellow. The 12W LED and its driver are built in, so there is no lamp to source. It is not dimmable, running at full output on an ordinary switch, and the beam is focused rather than broad, laying down a defined pool of light.
We reach for a spotlight like this where light needs to land on something in particular: a run of worktop, a reading chair, a shelf of books, a picture over the fireplace. The cool tone suits kitchens, utility rooms, garages and home offices, where accuracy matters more than atmosphere. Because the housing is compact, a few can be spaced down a hallway without the ceiling looking cluttered. It is one we suggest for rooms with lower ceilings, where anything hanging would be in the way. Dry interior rooms only: landings, studies and kitchens rather than shower rooms or open porches.
The fitting is double insulated, which means no earth is needed at the connection. Matt paint shows fingerprints less than gloss; when it does need attention, turn the power off, allow the fitting to cool, then wipe it over with a soft cloth barely damp with water and dry it at once. Abrasive creams and solvent cleaners will dull the paint, so keep them away. It carries a three year warranty. We stock the same spotlight in a square housing, and in a warmer white for living rooms and bedrooms, so one shape can run through a house with the tone chosen room by room.
Specification
| Colour |
Matt White |
| Second Colour |
Black |
| Ceiling Mountable |
Yes |
| Weight |
0.55KG |
| Diameter |
85mm |
| Height |
120mm |
| Materials Used |
Die-cast Aluminium |
| Energy Class |
F |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
F |
| Min Energy Class |
F |
| Lamp |
1 x 12W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
4000K Cool White (±5%) |
| Number of Switching Cycles |
30000 |
| Average Life of LED |
25000hrs |
| LED Brand |
CREE |
| LED Power |
12W (±5%) |
| Type of LED |
COB |
| Lumens per Watt (lm/W) |
91lm/W (±5%) |
| Beam Angle |
35° |
| System Flux |
1090lm (±5%) |
| CRI |
=80 |
| Light Distribution |
Down |
| Driver Included |
Yes |
| Type of Driver |
Constant Current |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
12W (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life |
25000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How much light does it give out?
The integrated LED draws 12W and produces around 1090 lumens at 4000K cool white, a tolerance of five per cent either way applying to both the output and the colour temperature.
Can I put it on a dimmer switch?
No. It is a non-dimmable fitting and should be run from a standard on/off switch. Wiring it to a dimmer risks flicker and can shorten the life of the driver.
Do I need to buy a bulb or a separate driver?
Neither. The LED is integrated and the driver is supplied within the fitting, so it arrives complete as one unit.
What size is it?
The round housing is 85mm in diameter and stands 120mm tall, and it weighs 0.55kg.
Is the beam wide or tight?
It is a narrow beam spotlight, so it picks out a target rather than washing a whole wall. For even general lighting across a room, space several in a run or choose a wider fitting.
Is it suitable for a bathroom?
Not in a wet or splash zone. It is rated IP20 for dry indoor rooms, so keep it to kitchens, hallways, studies and similar spaces.