Description
Neat, round and quietly plain, this recessed light gives a soft warm wash from a single integrated LED. It draws 6W and puts out 540 lumens at 3000K, a warm white that keeps timber, brick and paintwork looking friendly rather than clinical. The trim is matt white, so it reads as part of the ceiling once the light is off, and the spread is wide, which means you can space them out without stripes and shadows tracking across the floor. There is nothing fussy about it: a plain circle of light, sitting shallow in the ceiling.
It suits the everyday jobs. A run along a hallway, general light over a kitchen floor, a set across a bedroom or a landing where you want brightness without anything hanging down at head height. Because it is not dimmable, it works from an ordinary wall switch, which suits circuits you simply want on or off, such as a utility, a cloakroom or a stair. We would use it in dry rooms and keep it clear of splash zones over a bath or basin. Where more output is wanted, the range steps up through larger diameters.
The driver is supplied with it and the fitting is double insulated. Matt white also hides marks better than a polished face. For cleaning, wait until it is cold, then run a dry microfibre cloth over the trim and the lens; skip sprays and solvents, which can cloud a diffuser and mark paintwork. It carries a three year warranty. We also stock the same size in a cooler white, along with wider versions for bigger rooms, so a hallway, a kitchen and a landing can all be done in one look with the smaller and larger sizes mixed as the room needs. The LED is built in, so there is nothing to replace.
Specification
| Colour |
Matt White |
| Ceiling Mountable |
Yes |
| Recessable |
Yes |
| Weight |
0.15KG |
| Diameter |
105mm |
| Height |
35mm |
| Cut Out |
95mm |
| Materials Used |
Die-cast Aluminium |
| Energy Class |
F |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
F |
| Min Energy Class |
F |
| Lamp |
1 x 6W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| Number of Switching Cycles |
30000 |
| Average Life of LED |
25000hrs |
| LED Brand |
Epistar |
| Qty of SMD |
30 |
| SMD Chipset |
2835 |
| LED Power |
0.2W (±5%) |
| Type of LED |
SMD |
| Lumens per Watt (lm/W) |
90lm/W (±5%) |
| Beam Angle |
130° |
| System Flux |
540lm (±5%) |
| CRI |
=80 |
| Light Distribution |
Down |
| Driver Included |
Yes |
| Type of Driver |
Constant Current |
| Casing Material |
Aluminium |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
6W (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life |
25000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size opening does it need?
It is made for a 95mm cut-out. The visible face measures 105mm across, so the trim covers the edge of the hole, and the body is 35mm deep.
How bright is it, and what colour is the light?
It gives 540 lumens from 6W, at 3000K warm white, which reads soft and slightly golden against white paint.
Can I put it on a dimmer?
No. This version is non-dimmable and should be switched on and off in the normal way. Fitting it to a dimmer circuit can cause flicker and shorten its life.
Does it need a separate driver?
No, the driver comes with the fitting.
Can the LED be changed when it eventually fails?
The LED is integrated rather than a replaceable lamp, so the fitting is renewed as a whole. It is rated at 25,000 hours.
Is it suitable for a bathroom ceiling?
It is rated IP20, so it belongs in dry areas only, away from showers, baths and basins.