Description
This is a round downlight that sits recessed into the ceiling, finished in matt white so the visible rim reads as a quiet ring against a painted surface. The LED is integral and the driver is supplied with it, so the fitting comes as one piece. It draws 24W and gives 2160 lumens at 4000K, a crisp neutral white rather than a yellow one, thrown wide rather than tightly focused. It is not dimmable, so it is simply switched on and off.
We reach for the larger sizes in this range where a room wants fewer fittings and more light from each of them: kitchens, hallways, utility rooms, workshops and home offices. The cool white suits places where you need to see properly, over worktops, sinks, wardrobe rails and stairs, and it holds its own against daylight coming in at a window. Keep it to dry rooms indoors, though. There is no seal here against splashing, so a shower zone or an open porch wants a fitting rated for wet conditions instead.
The body stays shallow for a face of this width, and the white front is matt rather than glossy, which keeps glare and reflections down when you are sitting beneath it. Nothing is consumable: the LED is fixed in place, so there is no lamp to swap and no glass to unclip. If the rim gathers dust, turn the power off at the switch and run a dry cloth around it, and leave solvents and metal polishes well alone. It carries a three year warranty. We stock the Cabrera range in two smaller diameters for closer spacing, and this same size is also offered in a warmer colour temperature if you would rather the light leaned soft.
Specification
| Colour |
Matt White |
| Ceiling Mountable |
Yes |
| Recessable |
Yes |
| Weight |
0.51KG |
| Diameter |
225mm |
| Height |
60mm |
| Cut Out |
210mm |
| Materials Used |
Die-cast Aluminium |
| Energy Class |
F |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
F |
| Min Energy Class |
F |
| Lamp |
1 x 24W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
4000K Cool White (±5%) |
| Number of Switching Cycles |
30000 |
| Average Life of LED |
25000hrs |
| LED Brand |
Epistar |
| Qty of SMD |
120 |
| SMD Chipset |
2835 |
| LED Power |
0.2W (±5%) |
| Type of LED |
SMD |
| Lumens per Watt (lm/W) |
90lm/W (±5%) |
| Beam Angle |
130° |
| System Flux |
2160lm (±5%) |
| CRI |
=80 |
| Light Distribution |
Down |
| Driver Included |
Yes |
| Type of Driver |
Constant Current |
| Casing Material |
Aluminium |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
24W (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life |
25000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size hole does this need?
It is made for a 210mm cut-out, with a 225mm face that covers the opening, and the body is 60mm deep.
Can I dim it?
No. This version is non-dimmable and should be run from a standard on/off switch rather than a dimmer.
Do I need a separate driver?
No, the driver is included with the fitting.
How bright is it, and what colour is the light?
It produces 2160 lumens from 24W at 4000K, a neutral cool white with a broad spread rather than a narrow beam.
Is it suitable for a bathroom?
It is rated IP20, so keep it to dry areas. For zones near a bath or shower, choose a fitting with a higher ingress rating.
Will it match the smaller Cabrera downlights?
Yes. The 10.5cm and 14.4cm round versions share the same matt white finish, so mixed sizes read as one family.