Description
The Blingo is a square recessed LED panel that drops into a standard ceiling grid and casts a broad, even wash of light. It draws 34W from a 220-240V AC mains supply and pushes out 4080 lumens at a fixed 6500K daylight tone, with a wide 115 degree spread that keeps the brightness flat across the face rather than pooling in spots. Measuring 595 x 595 x 25 mm, it follows the familiar 600x600 grid module, which buyers in the US will know as the 2x2 troffer format used across suspended drop ceilings.
This panel suits offices, classrooms, retail floors, reception areas and corridors where a clean, glare-controlled ceiling line matters. At general lighting levels its 4080 lumens cover around 14 m², so a small meeting room or back office is comfortably served by a single unit, with larger open-plan spaces using a grid of panels laid out across the ceiling tiles. Because it recesses into the ceiling void, allow clearance above the grid for the body and driver to sit. The cool 6500K daylight output reads as bright and neutral, which works well in task-led commercial settings rather than soft domestic rooms.
The frame is steel finished in white, giving a flush, low-profile face once seated in the grid. It carries an IP20 rating, so it is intended for dry indoor positions only and should be kept clear of bathrooms, damp areas and any exposed outdoor location. The driver is supplied with the panel, so no separate control gear needs to be specified, and it is a non-dimmable fixture running straight to a switched live. Rated for 50,000 hours at Ra 80 colour rendering, it is built for long commercial duty cycles. Matching sizes sit within the wider Blingo range for grid ceiling projects.
Specification
| Power |
34W |
| Voltage |
220-240 AC |
| Luminous flux |
4080 lm |
| Efficiency |
120 lm/W |
| Colour temperature |
6500K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
115° |
| IP rating |
IP20 |
| Dimmable |
No |
| Driver included |
Yes |
| Mounting |
Recessed Mount In The Ceiling |
| Lifespan |
50,000 hours |
| Shape |
Square |
| Dimensions |
595 × 595 × 25 mm |
| Weight |
1.37 kg |
| Material |
Steel |
| Finish |
White |
Downloads
Frequently Asked
Does this panel fit a standard suspended ceiling grid?
Yes. At 595 x 595 mm it drops into the common 600x600 module, the 2x2 troffer size used in most drop and suspended ceilings. It recesses into the ceiling, so leave clearance above the grid for the body and driver.
How many lumens does it give and what area does it cover?
It produces 4080 lumens from 34W, an efficiency of 120 lm/W. At general lighting levels that covers around 14 m², so one panel suits a small office or meeting room, with larger spaces using a grid of panels.
Is the panel dimmable?
No, this is a non-dimmable panel and should be wired to a standard switched live. The driver is supplied with the fixture, so no separate control gear needs to be sourced.
How do I clean the panel face?
Switch off and let it cool, then wipe the face with a soft, dry or lightly damp cloth. Avoid solvents and abrasive cleaners, and keep moisture away from the edges as it is an IP20 indoor fitting.