Description
The ASTEN is a compact recessed downlight built around a small Ø30 mm round aperture, drawing 8W from a 12V DC supply at an efficiency of 40 lm/W. It throws a warm 3000K light across a wide 105 degree beam, giving a soft, evenly spread wash rather than a tight spot. American buyers will recognise this format as a miniature recessed can light, sized for trim detailing and accent runs where a full-size downlight would look heavy. The colour rendering sits at Ra 80, keeping surfaces and finishes looking natural under the light.
Thanks to its small aperture and broad spread, the ASTEN works well as a row of marker or accent points rather than a single room light. It suits sheltered outdoor settings such as eaves, soffits and porch ceilings, as well as bathroom and shower-zone ceilings indoors, where its IP65 rating allows direct contact with water. Because each fitting is low output and wide-beamed, plan them as a cluster spaced along a ceiling line to graze a wall or mark a threshold; the wide 105 degree angle means they blend into a continuous glow when set closely together rather than leaving dark gaps between points.
The body is aluminium alloy in a white finish, with the optics and housing rated to IP65 so the fitting copes with rain, splashing and washdown. It runs on a 12V DC supply, so a suitable low-voltage driver or transformer is needed to power it. Mounting is recessed into the ceiling through a small round cut-out, and at just 14 g per unit the fitting sits flush without loading the surface. The light source is integrated and rated to 30,000 hours, and this version is not dimmable. The ASTEN range includes matching low-voltage points for coordinated installs.
Specification
| Power |
8W |
| Voltage |
12 DC |
| Efficiency |
40 lm/W |
| Colour temperature |
3000K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
105° |
| IP rating |
IP65 |
| Dimmable |
No |
| Mounting |
Recessed Mount In The Ceiling |
| Lifespan |
30,000 hours |
| Shape |
Round |
| Dimensions |
Ø30 × 16.3 mm |
| Weight |
14 g |
| Material |
Aluminium Alloy |
| Finish |
White |
Downloads
Frequently Asked
What size cut-out does the ASTEN need?
The fitting itself measures Ø30 mm, so it drops into a small round cut-out to suit that diameter. This is the recess hole, which is distinct from any visible trim around the face. Always check the bezel dimension against the cut-out when planning a row of points.
Can the ASTEN be used outdoors and in bathrooms?
Yes. With its IP65 rating it is weatherproof and suitable for exposed outdoor positions as well as wet locations. That covers sheltered eaves and soffits outside and shower-zone or bathroom ceilings inside.
Does it run straight from mains power?
No, the ASTEN is a 12V DC fitting, so it needs a suitable low-voltage driver or transformer between it and the mains supply. Size the driver to the total wattage of all the points you are running on the circuit. Keep the driver in a dry, accessible position.
How do I clean the ASTEN?
Wipe the white face with a soft, slightly damp cloth and a mild detergent, then dry it off. Avoid abrasive pads or solvents that could dull the finish. For outdoor units, a periodic clean keeps the lens clear and the output bright.