Description
The Knightsbridge SUR5LEDEM is a 1500mm LED emergency luminaire delivering 4790lm output from a 45W integrated SMD LED array at 4000K cool white. The fitting operates in maintained, non-maintained or switched emergency modes with a 3-hour battery backup providing 190lm emergency output when mains power is lost. The pressed steel and polypropylene body houses a constant current driver, opal diffuser and push-fit loop-in/loop-out terminals for daisy-chain wiring.
Designed for offices, schools, healthcare facilities and retail environments, the luminaire can be surface-mounted directly to ceilings or suspended using the optional Knightsbridge suspension kit (sold separately). The low 45mm profile fits rooms with restricted ceiling voids and the 110-degree beam angle provides wide-area illumination suitable for corridor runs, open-plan offices and classroom blocks. The IP20 rating limits use to internal dry areas.
The 1500mm length and 200mm width give the fitting a substantial presence across standard ceiling grids, and the white powder-coated finish integrates with most commercial ceiling finishes. The opal polycarbonate diffuser reduces glare from the LED array below while maintaining high lumen efficiency at 133.97lm/W. The L70B50 rating of 50,000 hours indicates the LED will retain 70% of initial output after 50,000 hours of operation, reducing maintenance frequency compared to older fluorescent battens.
The fitting is Class I and requires earthing. The constant current driver is compatible with various Knightsbridge PIR and daylight sensors for occupancy-based control, allowing the luminaire to dim or switch off when spaces are unoccupied or daylight levels are sufficient. The 5-year warranty covers the driver and LED array but excludes the emergency battery.
Specification
| Length |
1500 mm |
| Width |
200 mm |
| Projection |
45 mm |
| Construction |
Pressed steel |
| Construction 2 |
& polypropylene |
| Finish |
White |
| Class |
I |
| IP Rating |
IP20 |
| Primary Voltage |
230V 50Hz |
| Diffuser |
Opal |
| Emergency |
Maintained / Non-maintained / Switched |
| Lamp Technology |
SMD LED |
| Lamp Included |
Yes |
| Dimmable |
No |
| L70B50 |
50000 |
| Energy Rating (Class) post 2021 SLR |
D |
| Beam Angle |
110 |
| CCT |
4000 K |
| Light Colour |
Cool White |
| Lumens |
4790 lm |
| Lumens (Light Source only) |
6040 lm |
| Lumens (Em. mode) |
190 lm |
| Wattage |
45 |
| Efficacy |
133.97 lm/W |
| CRI |
>80 |
| Driver Type |
Constant Current |
| Warranty |
5 |
| Warranty Information |
(excluding battery) |
Downloads
Product Specification Sheet
Product Manual
Frequently Asked
What are the three emergency modes?
Maintained mode keeps the LED on continuously and switches to battery in a power cut. Non-maintained mode only illuminates from battery when mains power is lost. Switched mode allows normal switching with automatic battery activation during power failure. All three modes provide 190lm output for 3 hours from the internal battery.
Can it be suspended from the ceiling?
Yes. The luminaire can be surface-mounted or suspended using the optional Knightsbridge suspension kit, sold separately. The suspension kit allows the fitting to hang pendant-style from ceilings where surface-mounting is not practical.
Is it suitable for corridor lighting?
Yes. The 1500mm length, 4790lm output and 110-degree beam angle make it well-suited to corridor runs in offices, schools and healthcare buildings. Multiple units can be daisy-chained using the loop-in/loop-out terminals.
How long does the battery last?
The emergency battery provides 3 hours of backup lighting at 190lm output when mains power is lost. The battery is not covered by the 5-year warranty and will require replacement periodically depending on discharge frequency and environmental conditions.