Free Delivery on all orders over £99*

10AX 1 Gang Intermediate Toggle Switch - Brushed Chrome Square Edge

£1099
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge CSTOG12BC is a 10AX 1-gang intermediate toggle switch in brushed chrome with a square edge profile. An intermediate switch is required in 3-way lighting circuits where three switches control a single light fitting, typically on staircases and landings where switches are positioned at the bottom of the stairs, top of the stairs, and end of the landing. The intermediate switch sits in the middle position of the circuit to allow all three switches to function correctly.

Rated at 10AX, the switch handles loads up to 2,300W on a 230V circuit, suitable for standard domestic lighting including LED, halogen and incandescent fittings. The square edge design sits flush to the wall surface with a built-in gasket behind the faceplate that seals the edge against the mounting box, reducing draughts and dust ingress through the wall cavity. The switch fits a minimum 16mm back box depth and requires standard UK double-gang wiring terminals.

The brushed chrome finish is applied to 430 stainless steel, providing a hard-wearing surface resistant to tarnishing and fingerprint marking in high-traffic areas. The metal toggle matches the faceplate finish and gives a tactile switching action with positive on/off positions. The square edge profile pairs with other Knightsbridge square edge accessories in the same finish to maintain visual consistency across a room or property.

Specification
Height 89mm
Width 89mm
Depth 37.3mm
Projection 27.1mm
Recessed Depth 10.2mm
Min. Mounting Box Depth 16mm
Plate Depth 10.5mm
Construction 430 Stainless Steel
Finish Brushed Chrome
IP Rating IP20
Primary Voltage 230V 50Hz
Earth Terminal Yes
Terminal Screw
Warranty 25 Year Guarantee
Downloads

Product Specification Sheet

Frequently Asked

What is an intermediate switch used for?

An intermediate switch is required in 3-way lighting circuits where three switches control a single light fitting. It sits in the middle position of the circuit between two 2-way switches, typically on a staircase landing where switches are positioned at the bottom of the stairs, top of the stairs, and end of the landing.

What back box depth is required?

A minimum 16mm back box depth is required for installation. The switch has a total depth of 37.3mm, with 27.1mm projecting from the wall once fitted.

Can this be used with LED bulbs?

Yes. The 10AX rating handles standard LED, halogen and incandescent lighting loads up to 2,300W on a 230V circuit. The switch is certified to EN 60669-1 for general domestic use.

What other finishes are available in this range?

Knightsbridge produces this square edge intermediate toggle switch in multiple finishes including polished chrome, brushed chrome, satin brass, polished brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge CSTOG12BC is a 10AX 1-gang intermediate toggle switch in brushed chrome with a square edge profile. An intermediate switch is required in 3-way lighting circuits where three switches control a single light fitting, typically on staircases and landings where switches are positioned at the bottom of the stairs, top of the stairs, and end of the landing. The intermediate switch sits in the middle position of the circuit to allow all three switches to function correctly.

    Rated at 10AX, the switch handles loads up to 2,300W on a 230V circuit, suitable for standard domestic lighting including LED, halogen and incandescent fittings. The square edge design sits flush to the wall surface with a built-in gasket behind the faceplate that seals the edge against the mounting box, reducing draughts and dust ingress through the wall cavity. The switch fits a minimum 16mm back box depth and requires standard UK double-gang wiring terminals.

    The brushed chrome finish is applied to 430 stainless steel, providing a hard-wearing surface resistant to tarnishing and fingerprint marking in high-traffic areas. The metal toggle matches the faceplate finish and gives a tactile switching action with positive on/off positions. The square edge profile pairs with other Knightsbridge square edge accessories in the same finish to maintain visual consistency across a room or property.

    Specification
    Height 89mm
    Width 89mm
    Depth 37.3mm
    Projection 27.1mm
    Recessed Depth 10.2mm
    Min. Mounting Box Depth 16mm
    Plate Depth 10.5mm
    Construction 430 Stainless Steel
    Finish Brushed Chrome
    IP Rating IP20
    Primary Voltage 230V 50Hz
    Earth Terminal Yes
    Terminal Screw
    Warranty 25 Year Guarantee
    Downloads

    Product Specification Sheet

    Frequently Asked

    What is an intermediate switch used for?

    An intermediate switch is required in 3-way lighting circuits where three switches control a single light fitting. It sits in the middle position of the circuit between two 2-way switches, typically on a staircase landing where switches are positioned at the bottom of the stairs, top of the stairs, and end of the landing.

    What back box depth is required?

    A minimum 16mm back box depth is required for installation. The switch has a total depth of 37.3mm, with 27.1mm projecting from the wall once fitted.

    Can this be used with LED bulbs?

    Yes. The 10AX rating handles standard LED, halogen and incandescent lighting loads up to 2,300W on a 230V circuit. The switch is certified to EN 60669-1 for general domestic use.

    What other finishes are available in this range?

    Knightsbridge produces this square edge intermediate toggle switch in multiple finishes including polished chrome, brushed chrome, satin brass, polished brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.