Free Delivery on all orders over £99*

10AX 1 Gang Intermediate Toggle Switch - Antique Brass Square Edge

£1799
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge 10AX 1-gang intermediate toggle switch provides the middle switching point in three-switch circuits, allowing a single light or lighting group to be controlled from three separate wall locations. The switch features an antique brass square-edge metal faceplate with a matching metal toggle mechanism that clicks up and down for on/off control.

Designed for stairwells, landings, long hallways and open-plan spaces where light control is needed from more than two positions, the intermediate switch sits between two 2-way switches to complete the circuit. The 10AX rating handles lighting loads up to 2,300W on a 230V circuit, covering typical domestic and light commercial installations. The 16mm minimum back box depth requirement makes it compatible with shallow mounting boxes in stud walls and plasterboard partitions.

The antique brass finish is applied to premium-grade steel and shows the subtle surface variation characteristic of aged brass, with darker tones in the recesses and lighter highlights on the raised edges. The square edge profile sits flush with the wall without a bevelled surround, giving clean lines that suit traditional, heritage and transitional interiors. The built-in gasket behind the faceplate provides IP20 environmental protection and the terminals accept screw fixing for standard lighting cable.

Specification
Height 89 mm
Width 89 mm
Projection 10.5 mm
Min. Mounting Box Depth 16mm
Construction Premium grade steel
Finish Antique Brass
IP Rating IP20
Primary Voltage 230V 50Hz
Earth Terminal Yes
Terminal Screw
Warranty 25
Downloads

Product Specification Sheet

Product Manual

Frequently Asked

What is an intermediate switch and when is it needed?

An intermediate switch is the middle switching point in a three-switch circuit, sitting between two 2-way switches. It's needed when you want to control a light from three separate locations, such as in a stairwell with switches on the ground floor, landing and upper floor, or in a long hallway with entry points at both ends and the middle.

What back box depth is required?

A minimum 16mm mounting box depth is needed. This shallow requirement makes the switch compatible with standard UK plasterboard back boxes and stud wall installations where deeper boxes cannot be recessed.

What does the 10AX rating mean?

The 10AX rating indicates the switch can handle up to 10 amps on a lighting circuit, which equates to approximately 2,300W at 230V. This covers typical domestic and light commercial lighting loads without requiring a higher-rated switch.

What other finishes are available in this range?

Knightsbridge produces this square edge toggle switch design in a range of metal finishes including polished brass, brushed chrome, polished chrome, antique brass, satin brass and matt black. Use the search function to find other variants in stock at Niori.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Installation

Fits standard UK back boxes

Designed to fit standard UK back boxes for a straightforward swap of your existing fittings.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge 10AX 1-gang intermediate toggle switch provides the middle switching point in three-switch circuits, allowing a single light or lighting group to be controlled from three separate wall locations. The switch features an antique brass square-edge metal faceplate with a matching metal toggle mechanism that clicks up and down for on/off control.

    Designed for stairwells, landings, long hallways and open-plan spaces where light control is needed from more than two positions, the intermediate switch sits between two 2-way switches to complete the circuit. The 10AX rating handles lighting loads up to 2,300W on a 230V circuit, covering typical domestic and light commercial installations. The 16mm minimum back box depth requirement makes it compatible with shallow mounting boxes in stud walls and plasterboard partitions.

    The antique brass finish is applied to premium-grade steel and shows the subtle surface variation characteristic of aged brass, with darker tones in the recesses and lighter highlights on the raised edges. The square edge profile sits flush with the wall without a bevelled surround, giving clean lines that suit traditional, heritage and transitional interiors. The built-in gasket behind the faceplate provides IP20 environmental protection and the terminals accept screw fixing for standard lighting cable.

    Specification
    Height 89 mm
    Width 89 mm
    Projection 10.5 mm
    Min. Mounting Box Depth 16mm
    Construction Premium grade steel
    Finish Antique Brass
    IP Rating IP20
    Primary Voltage 230V 50Hz
    Earth Terminal Yes
    Terminal Screw
    Warranty 25
    Downloads

    Product Specification Sheet

    Product Manual

    Frequently Asked

    What is an intermediate switch and when is it needed?

    An intermediate switch is the middle switching point in a three-switch circuit, sitting between two 2-way switches. It's needed when you want to control a light from three separate locations, such as in a stairwell with switches on the ground floor, landing and upper floor, or in a long hallway with entry points at both ends and the middle.

    What back box depth is required?

    A minimum 16mm mounting box depth is needed. This shallow requirement makes the switch compatible with standard UK plasterboard back boxes and stud wall installations where deeper boxes cannot be recessed.

    What does the 10AX rating mean?

    The 10AX rating indicates the switch can handle up to 10 amps on a lighting circuit, which equates to approximately 2,300W at 230V. This covers typical domestic and light commercial lighting loads without requiring a higher-rated switch.

    What other finishes are available in this range?

    Knightsbridge produces this square edge toggle switch design in a range of metal finishes including polished brass, brushed chrome, polished chrome, antique brass, satin brass and matt black. Use the search function to find other variants in stock at Niori.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.