Description
The Testara-E is a slim, round LED flush ceiling light in white, with a white plastic body framing a white plastic diffuser. It measures 21.1cm across and stands just 3cm deep, so it sits close to the ceiling and keeps a low profile in rooms where headroom matters. The LED is integrated, giving 1,500lm of light at 3000K, a warm white that feels relaxed rather than clinical. There is no bulb to buy. It is rated IP20, which settles where it belongs: indoors, in dry rooms, away from steam and splashing water.
Because it is compact, this flush light suits the smaller spaces of a home: a hallway, a landing, a box room, a walk-in wardrobe or a bedroom with a low ceiling. Its plain round shape and white finish blend into a white or pale ceiling, so the light does the work while the fitting itself stays quiet. For anyone replacing an old pendant that hangs too low, it clears heads easily and still fills a modest room with useful light. The warm 3000K tone sits comfortably alongside wood, plants and soft furnishings, so it suits living spaces as well as passageways.
The body and diffuser are plastic, which keeps the weight to 0.38KG and makes the light easy to handle at the ceiling. There is no switch on the fitting; it is switched at the wall, so it works from the light switch you already have. It runs on 220-240V, 50/60Hz mains and carries an energy class of D. The LED and driver can be replaced by a specialist, so the light need not be thrown away if a part fails. As a wired-in mains light, it should be installed by a qualified electrician, and the installation instructions are available to download. Before ordering, check that a light 21.1cm across will cover the mark your old fitting left.
Specification
| Lumens |
1,500lm |
| Colour Temperature |
3000K |
| Body Material |
Plastic |
| Body Colour |
White |
| Shade Material |
Plastic |
| Shade Colour |
White |
| IP Rating |
IP20 |
| Light Source |
LED, integrated |
| Energy Class |
D |
| Height |
3cm |
| Diameter |
21.1cm |
| Weight |
0.38KG |
| Replaceable Parts |
LED and driver replaceable by a specialist |
| Protection Class |
Class II |
| Voltage |
220-240V, 50/60Hz |
| Switch |
None (switched at the wall) |
Downloads
Installation Instructions (PDF)
Frequently Asked
Can this ceiling light go in a bathroom?
No. It is rated IP20, which means it belongs indoors in dry rooms, away from steam, splashing water and any outdoor position.
How bright is the light, and what colour is it?
It gives 1,500lm from an integrated LED at 3000K, a warm white that suits bedrooms, hallways, landings and living spaces.
How big is the Testara-E?
It is 21.1cm across and 3cm deep, and it weighs 0.38KG, so it sits close to the ceiling and suits rooms with low headroom.
Does it need a bulb?
No. The LED is integrated, so there is no bulb to buy, and the LED and driver can be replaced by a specialist if needed.
How is the light switched?
There is no switch on the fitting itself. It is switched at the wall, so it works from an ordinary light switch in the room.