Rifa LED 17.5W Round Ceiling Light Cool White - B/W

The Rifa LED is a round surface-mounted ceiling light measuring 400mm across and 116mm deep, pairing a black and white body with an integrated LED source rated at 17.5W. It puts out 1500 lumens at a fixed 4000K cool white tone, with a wide 120 degree beam that spreads light evenly across a room rather than focusing it in one direction. The flush mount fitting sits close to the ceiling, which is where American buyers tend to search for a flush mount LED ceiling light, and there is no separate bulb to fit because the LED is built in.

The cool white output suits spaces where a crisp, neutral light helps with everyday tasks, such as a kitchen, hallway, utility room or home office. At general lighting levels its 1500 lumens cover around 5 m², so it works well as the main light in a smaller room or as one of several fittings spaced across a larger open area. Because it mounts flush against the surface it sits well on standard and lower ceilings where a hanging or pendant fitting would feel intrusive. It is rated IP20 for dry indoor use, so keep it clear of bathrooms, porches and any damp or outdoor location.

Built with a metal housing in a black and white finish, the Rifa LED uses a fixed integrated LED with a quoted lifespan of 25,000 hours and a colour rendering of Ra 80. It runs directly from a 220 to 240V AC mains supply with no separate transformer to specify, and fixes to the ceiling through the mounting plate. This version is not dimmable, so it is best paired with a standard on and off switch. The Rifa LED range also includes a warm white variant for rooms wanting a softer tone.

What size room does it suit?

With 1500 lumens at 4000K cool white, the Rifa LED covers around 5 m² at general lighting levels. That makes it a good single fitting for a smaller kitchen, hallway or utility room, or one of several units spaced across a larger space.

Is it dimmable?

No, this version is not dimmable. It is designed to run from a standard on and off switch, so avoid pairing it with a dimmer module as this can cause flicker or buzz.

Does it take a separate bulb?

No, the LED is integrated into the fitting, so there is no bulb to buy or replace. The full unit is rated for around 25,000 hours of use, after which the whole fitting is replaced.

How do I clean it?

Switch the light off and let it cool, then wipe the diffuser and metal housing with a soft, dry or slightly damp cloth. Avoid harsh solvents or abrasive cleaners, which can dull the finish over time.