REGIS 610x600 72W 4x18W T8 Recessed Louvre Troffer with 3 Light Channels - White

The REGIS is a recessed louvre troffer built to drop into a standard suspended-ceiling grid, the recessed modular fitting that gives offices and commercial interiors an even, low-glare wash of light. It runs four G13 T8 tubes for a total of 72W (4 x 18W), with the louvre format directing output downward and cutting harsh glare across desks and walkways. American specifiers will recognise this grid format as a troffer, the workhorse of drop-ceiling lighting. The 610 x 595 mm square body sits flush in the ceiling line, with three light channels splitting the tubes for a balanced spread.

Spaces it suits well include open-plan offices, meeting rooms, reception areas, classrooms and back-of-house corridors where a clean ceiling grid and steady task light are wanted. Because the louvre shields the tubes, it keeps reflected glare off screens, which matters across rows of workstations. Mount it into a 600 mm modular ceiling grid at typical office ceiling heights; for full coverage, space several units across the bay in line with the grid layout rather than relying on a single fitting. The louvre delivers a wide, even throw over the floor below rather than a tight beam, so output is best judged by how many units fill the ceiling area.

The body is steel finished in white to blend into a painted or tiled ceiling line, with a louvre that drops the glare from the four T8 tubes. It carries an IP40 rating, suited to dry indoor and sheltered locations and not to fully exposed outdoor positions or direct water. The fitting recesses into the ceiling grid and takes G13-capped T8 tubes, which can be replaced individually over the fitting's life. The REGIS sits within a wider Regis range of grid fittings, with other sizes and channel layouts available to match the same ceiling line.

Product Specification Sheet

Range Datasheet

Does the REGIS fit a standard suspended-ceiling grid?

Yes. It is a recessed fitting designed to drop into a modular suspended-ceiling grid, with a 610 x 595 mm square body that sits flush in a 600 mm grid line. It mounts into the ceiling rather than on the surface, so the ceiling stays clean and even.

What tubes does it take and can they be replaced?

It uses four T8 tubes on G13 caps for a total of 72W (4 x 18W). Each tube can be swapped individually when it reaches the end of its life, so you replace only the tube that has failed rather than the whole fitting.

How bright is it and what lux levels does it give an office?

With 72W of T8 tube output across three light channels, it is set up for general office lux levels across a workstation bay. For full coverage, space several units across the ceiling in line with the grid rather than relying on one fitting.

How do you clean the louvre?

Switch off and let the tubes cool, then wipe the louvre and the painted steel body with a soft, dry or lightly damp cloth. Avoid soaking it, as the fitting is rated IP40 for dry indoor and sheltered use only, and dust the louvre blades periodically to keep the output clear.