Description
The Polmorne is a fabric pendant light with a faceted teardrop shade: fine black mesh fabric stretched over slim black ribs, hanging from a black cord and a round ceiling rose. The body is black steel and the shade is black fabric, so the whole light reads as one clean, dark outline. The shade is 33.5cm across and the pendant measures 110cm in overall height. It takes a single E27 bulb, which is not included, and its IP20 rating means it belongs indoors in a dry room.
Because the mesh is open enough to see the bulb through it, this pendant puts the lamp you choose on show, so a decorative filament bulb suits it well. Hung over a small dining table, a kitchen island or a reading chair, it gives a dark, graphic shape against a pale wall. At 33.5cm across it has enough presence to anchor a table without crowding a modest room, and the black finish sits comfortably alongside warm wood, soft textiles and pale stone. It suits a hallway or a bedroom just as well, anywhere dry and indoors where you want a single light with character.
The construction is simple and light: a black steel body, a mesh fabric shade held in its faceted shape by slim ribs, and a total weight of 0.68KG. It runs on 220-240V, 50/60Hz mains and has no switch of its own, so you turn it on and off at the wall switch, like most ceiling lights. As a wired-in fitting, it is installed by a qualified electrician. The black finish is consistent from ceiling rose to shade, so there is no contrasting metal to match elsewhere in the room. When choosing a bulb, pick an E27 whose glass shape and colour please you, since it stays visible through the mesh every evening.
Specification
| Body Material |
Steel |
| Body Colour |
Black |
| Shade Material |
Fabric |
| Shade Colour |
Black |
| IP Rating |
IP20 |
| Light Source |
E27 (bulb not included) |
| Overall Height |
110cm |
| Diameter |
33.5cm |
| Weight |
0.68KG |
| Protection Class |
Class II |
| Voltage |
220-240V, 50/60Hz |
| Operating Voltage |
220-240V, 50/60Hz |
| Switch |
None (switched at the wall) |
Frequently Asked
Can the Polmorne pendant go in a bathroom?
No. Its IP20 rating means it is made for dry rooms indoors, so it should stay away from bathrooms and outdoor spaces.
Is a bulb included?
No, the bulb is not included. The pendant takes a single E27 bulb, and since the bulb shows through the mesh, a decorative shape is worth choosing.
How big is the shade?
The shade is 33.5cm in diameter and the pendant measures 110cm in overall height, a comfortable size over a small dining table or a kitchen island.
Does the pendant have its own switch?
No, there is no switch on the light itself. It is switched at the wall, like most ceiling lights, and runs on 220-240V, 50/60Hz mains.
What materials are the body and shade?
The body is black steel and the shade is black fabric, a fine mesh stretched over slim black ribs into a faceted teardrop shape.