Description
The Pogliola-E is a round LED flush ceiling light in white. A smooth opal diffuser hides the light source and spreads an even glow across the room. It is 26cm across and only 5.5cm high, so it sits close to the ceiling and keeps the room feeling open, which matters where ceilings are low. The body is steel and the shade is plastic, both in white. The LEDs are integrated, drawing 10W and giving 1,250 lumens at 4000K, a neutral light that is bright and clear without looking cold. It is rated IP20, which means it is made for dry rooms indoors, away from bathrooms and the weather.
We would put it in a hallway, a landing, a bedroom, a study or a box room, anywhere a dry ceiling needs one simple fitting for good general light. The slim profile is a good answer for loft rooms and older homes where a pendant would hang too low. The plain white disc sits quietly against a white ceiling, so it suits almost any style of decor. Because the LEDs are integrated, there is no separate bulb to buy, and 1,250 lumens from 10W is a generous amount of light for a modest draw.
The white steel body and plastic shade keep it light, with a packed weight of 0.273KG. There is no switch on the fitting itself. It is switched at the wall, and it is not dimmable, so pair it with a standard wall switch rather than a dimmer. It runs on 220-240V, 50/60Hz mains, and its energy class is E. As it connects to the mains, it should be installed by a qualified electrician. The installation instructions come as a download, so they are worth having to hand before the work starts.
Specification
| Height |
5.5cm |
| Diameter |
26cm |
| Body Material |
Steel |
| Body Colour |
White |
| Shade Material |
Plastic |
| Shade Colour |
White |
| Light Source |
LED, integrated |
| Wattage |
10W |
| Lumens |
1,250lm |
| Colour Temperature |
4000K |
| Dimmable |
No |
| Switch |
None (switched at the wall) |
| IP Rating |
IP20 |
| Protection Class |
Class I |
| Voltage |
220-240V, 50/60Hz |
| Energy Class |
E |
| Weight (packed) |
0.273KG |
Downloads
Installation Instructions (PDF)
Frequently Asked
Can I put the Pogliola-E in a bathroom?
No. It is rated IP20, which means it is made for dry rooms indoors, so we would keep it out of bathrooms and away from water or steam.
How bright is this ceiling light?
It gives 1,250 lumens from 10W of integrated LEDs at 4000K, a neutral light that is clear and bright enough for general room lighting.
Is the light dimmable?
No, it is not dimmable. It has no switch of its own and is controlled from your wall switch, so a standard switch rather than a dimmer is the right partner.
How big is the fitting?
It is 26cm across and 5.5cm high, so it sits close to the ceiling and works well in rooms where a hanging pendant would feel too low.
Does it need a bulb?
No bulb is needed, because the LEDs are integrated into the fitting. You simply switch it at the wall whenever you need light.
What materials are the body and shade?
The body is steel and the shade is plastic, both finished in white, giving a plain, clean disc that suits a white ceiling well.