Description
The Ocellis is a 22W LED table lamp built around two intersecting elliptical loops of brushed aluminium finished in rose gold, with an opal silicone diffuser running the length of each loop. The integrated 3000K LED strips cast light through the silicone in a continuous 360° glow, turning the entire frame into the light source rather than directing light from a single point.
Designed for side tables, console tables and bedroom nightstands where ambient light is needed without the hard shadows or focused beams of traditional task lighting, the Ocellis sits on a 23cm-wide rose gold base with a total height of 41cm. The open elliptical design means light radiates in all directions, creating a soft wash on walls and ceilings as well as downward onto the surface below. The 15cm depth gives the lamp a sculptural presence without occupying excessive surface area on narrow consoles or bedside tables.
The brushed aluminium frame weighs 1.23kg and the rose gold finish provides a warm metallic tone that sits between copper and brass, pairing well with blush, grey and neutral-toned interiors. The opal silicone diffuser softens the LED output and hides the individual diodes, presenting as a continuous ribbon of light rather than visible dots. The lamp carries an IP20 rating, suitable for dry indoor locations only.
The Ocellis runs on 35V DC via an external transformer (included) and draws 22W at full output. The Energy Class F rating reflects the non-removable integrated LED design — when the LED reaches end-of-life the entire lamp requires replacement or manufacturer service rather than a simple bulb swap.
Specification
| Width |
23cm |
| Height |
41cm |
| Depth |
15cm |
| Weight |
1.23kg |
| Energy Class |
F |
| IP |
IP20 |
| Electric Class |
Class 3 |
| Power |
22W |
| Voltage |
35V |
| Frequency |
50/60Hz |
| Lumen |
1.98lm |
| Colour Temperature |
3000K |
| CRI |
>80 |
| Finish |
Rose Gold, Opal |
Downloads
Product Specification Sheet
Assembly Instruction
Frequently Asked
Is the Ocellis dimmable?
The lamp uses an integrated 22W LED on a fixed 35V supply. Dimming capability depends on the external transformer supplied with the unit — contact us before purchase to confirm dimmer compatibility if required.
Can the LED be replaced when it fails?
No. The LED strips are integrated into the aluminium frame and silicone diffuser and are not user-replaceable. The Energy Class F rating reflects this non-serviceable design. Expected LED lifespan is typically 20,000-30,000 hours at 3000K output.
What surface area does it need?
The base is 23cm wide with a 15cm front-to-back depth. The lamp suits standard bedside tables, narrow console tables and side tables where a compact footprint is needed without sacrificing presence.
Is it suitable for bathrooms?
No. The IP20 rating means the Ocellis is for dry indoor locations only and must not be used in bathrooms, kitchens near sinks, or outdoor covered areas where moisture is present.