Notus 1220x300 36W 236 4LED T8 LED Ceiling Light - White

The Notus is a rectangular surface-mounted ceiling fitting that holds two T8 LED tubes on G13 caps, running at 2 x max 36W from a 220-240V AC mains supply. Measuring 1223 x 295 x 75 mm, it spreads a broad, even wash of light across the space below from its twin-tube layout. In US terms a fitting of this kind sits close to a wraparound or twin-tube shop ceiling light, mounted flush to the surface rather than recessed. The replaceable T8 format keeps the light source serviceable, and the open twin-tube arrangement keeps output high across the full length of the body.

Built around a 1.2 metre footprint, the Notus suits workshops, garages, utility rooms, stores and back-of-house corridors where a wide rectangle of bright, practical light matters more than a decorative profile. Its long form throws light evenly along worktops, benches and walkways, so a single unit covers a generous working area and several can be arranged in a row down a longer room. Mount it on flat ceilings at standard working heights, where the twin G13 tubes give clear, shadow-light coverage for tasks and movement. It is rated IP20, so keep it to dry indoor positions and clear of bathrooms, porches or any damp or exposed location.

The body is steel finished in white, giving a clean, hard-wearing housing that holds its shape across the full 1223 mm span and weighs 2.60 kg. The two G13 lampholders take standard T8 LED tubes, which slot in and twist to lock, keeping replacement straightforward over the life of the fitting. It runs direct from 220-240V AC mains and is surface-mounted to the ceiling, so no recessed cut-out is required. The white finish keeps it discreet against a plain ceiling. The wider Notus range includes further tube and ceiling formats for matching a run of fittings.

How large an area does the Notus cover?

Its 1.2 metre twin-tube body gives a wide, even spread of light suited to a single small workshop, garage bay, utility room or a section of corridor. For longer spaces, several units can be arranged in a line to keep coverage continuous. Position them at standard working heights for clear task light below.

Can the Notus be used outdoors or in a bathroom?

No. It is rated IP20, which means dry indoor use only. Keep it clear of bathrooms, porches, carports and any damp or exposed position, and fit it only in protected indoor rooms such as workshops, garages and utility areas.

Does it take replaceable tubes?

Yes. It uses two T8 LED tubes on standard G13 caps, each rated up to 36W, so the light source can be swapped if needed. The tubes slot into the lampholders and twist to lock, making replacement quick without removing the whole fitting.

How do I clean and maintain it?

Switch off at the mains and let the fitting cool, then wipe the steel housing and tubes with a soft, dry or barely damp cloth. Avoid harsh solvents or abrasive pads, which can mark the white finish. A light dust now and then keeps output bright across the full length of the body.