Description
The Meba is a surface ceiling light built around two T8 LED tubes, each drawing up to 36W from a 220-240V AC supply through a G13 cap. The rectangular steel and plastic body measures 1250 x 153 x 65 mm, giving a long, even wash of light along its length rather than a single central point. Sold in the US bracket as a flush mount LED ceiling light, it sits close to the ceiling on a low-profile housing, which keeps it tidy in rooms where a pendant or deep fitting would get in the way.
The proportions suit corridors, utility rooms, garages, workshops and store rooms where a long run of light over a worktop or walkway is more useful than a round centre fitting. Its linear twin-tube layout spreads light across the floor below and works well in narrow spaces where the 1250mm length can follow the line of a bench or passage. Mount it on a flat ceiling at a standard height; in taller rooms the open twin-tube format still throws light downward effectively. As an indoor fitting it should be kept to dry interior spaces and is not intended for damp or outdoor positions.
Construction combines a steel chassis with a plastic body, finished in white so it blends into most ceilings. The fitting carries an IP20 rating, which confirms it as a dry indoor product only, with no protection against splashes or dust ingress. It uses replaceable G13-based T8 LED tubes rather than a sealed integrated panel, so the light source can be swapped without replacing the whole unit. The two tubes mount directly to the ceiling via the housing. This Meba sits within a wider range of linear LED ceiling fittings available from Niori in matching white finishes.
Specification
| Power |
2 x max 36W |
| Voltage |
220-240 AC |
| IP rating |
IP20 |
| Mounting |
Ceiling Mounted |
| Cap / base |
G13 |
| Light source |
T8 LED |
| Shape |
Rectangular |
| Dimensions |
1250 × 153 × 65 mm |
| Weight |
1.20 kg |
| Material |
Steel, Plastic |
| Finish |
White |
Downloads
Frequently Asked
What size room or area does it suit?
The Meba is a long 1250mm twin-tube fitting, so it works best over corridors, walkways, worktops and benches rather than a single small room centre. Its two 36W T8 LED tubes spread light along the length of the body, making it a good choice for narrow utility spaces, garages and store rooms.
Are the LED tubes replaceable?
Yes. The fitting uses two T8 LED tubes on a G13 cap rather than a sealed integrated panel, so each tube can be removed and replaced individually. This means you can swap a tube without changing the whole fitting.
Can it be used outdoors or in a bathroom?
No. The Meba is rated IP20, which means it is for dry indoor use only and offers no protection against moisture or dust. Keep it clear of bathrooms, damp rooms and any outdoor or sheltered-outdoor position.
How should the fitting be cleaned?
Switch off the supply and let the tubes cool, then wipe the white steel and plastic body and the tubes with a soft dry or barely damp cloth. Avoid soaking it or using harsh solvents, as the fitting is IP20 and not designed to be exposed to water.