Description
The Marvion is a 600mm circular chandelier built around a brushed brass ring, with hand-carved Spanish alabaster petals arranged radially in two overlapping tiers. An integrated 3000K LED housed within the brass ring casts warm light upwards and downwards through the alabaster, turning each stone petal into its own diffuser and producing a soft halo effect across the full 600mm diameter.
Designed for dining tables, kitchen islands, entrance halls and lounges with ceiling heights of 2.6m or above, the Marvion suits rooms where a wide, low-profile light fitting works better than a deep-drop pendant. The total drop measures 600mm, with a brushed brass canopy that fits standard UK ceiling roses. Three angled brass rods triangulate from the canopy down to the ring, giving lateral stability without crowding the alabaster ring visually.
Each petal is cut from solid Spanish alabaster with deliberately irregular, fractured edges rather than polished outlines, exposing the raw stone profile and the natural mineral veining within. Tonal variation runs from milky white through warm cream to areas of soft amber clouding, so no two petals match and the ring shows different character from every viewing angle. The brushed brass ring and rod structure is finished to a low-sheen warm tone that pairs the metalwork to the alabaster without competing with it.
Specification
| Material |
Brass & Natural Spanish Alabaster |
| Finish |
Soft White & Brass |
| Height |
600mm |
| Diameter |
600mm |
| Lamp Socket |
Integrated LED |
| Colour Temperature |
3000K |
| Voltage |
230V |
| Weight |
- |
| Warranty |
2 Year |
Frequently Asked
What size table or room does the Marvion suit?
At 600mm diameter, the Marvion works well above dining tables of 1.4-1.8m in length, kitchen islands of similar size, or as a central fitting in rooms of around 12-18m². Above a dining table it typically hangs 700-800mm above the surface; in a hallway or lounge, a higher position closer to the ceiling generally works better.
Is the integrated LED replaceable?
The LED is integrated into the brushed brass ring rather than being a swappable bulb. Integrated LEDs of this type are rated for many thousands of hours of use. The 2 year warranty covers the LED and driver against premature failure.
Does each alabaster petal look the same?
No. Each petal is carved from solid Spanish alabaster, so the veining, mineral inclusions, tonal variation and edge profile differ between individual pieces. This natural variation is part of the design rather than a defect, and it becomes more visible when the LED is lit.
How is the alabaster cleaned?
Alabaster is porous and softer than marble. Dust gently with a dry, soft microfibre cloth. For more stubborn marks a barely-damp cloth with distilled water is acceptable, but avoid soaking the stone and do not use household sprays, glass cleaners, polishes or chemical products on the petals.