Lunvera 1 Light Marble Table Lamp - Black & Brass

The Lunvera is a 680mm table lamp built around a cylindrical black marble column with fine white veining running through the polished stone. A circular brushed brass plinth grounds the base, and a slim brass stem rises from the top of the marble to support a 360mm white PVC drum shade. A single E27 lamp socket sits within the upper assembly, taking any standard screw-fit bulb up to the rating shown on the lampholder.

Suited to console tables in entrance halls, bedside tables in larger bedrooms, and side tables flanking a sofa, the Lunvera works as a paired lamp where two matching pieces frame a piece of furniture. The 360mm shade diameter and 680mm overall height give it more visual presence than a typical bedside lamp, so it reads best on surfaces at least 400mm deep. The inline switch on the cable controls the lamp at the cord.

Because the column is cut from natural marble, the veining pattern differs between individual pieces — the dramatic white striations across the dark stone are characteristic of the material rather than a printed finish. A second brushed brass accent ring sits between the marble and the shade, repeating the metallic detail at the plinth and at the small finial that caps the shade. The white PVC drum diffuses the bulb into a soft, even ambient glow.

What bulb does the Lunvera take?

The lamp uses a single E27 (Edison screw) bulb, sold separately. A warm-white LED between 6-10W and 2700K-3000K pairs well with the white PVC drum shade for ambient bedside or side-table light.

Does the marble pattern vary between lamps?

Yes. The column is cut from natural marble, so the white veining across the black stone differs between individual pieces. No two columns are identical, and this variation is part of the material rather than a defect.

Is the lamp dimmable?

The Lunvera uses a standard E27 lampholder with an inline cord switch, so dimming depends entirely on the bulb fitted. Use a dimmable LED or filament E27 bulb paired with a compatible plug-in or wall dimmer if dimming is required.

How is the marble cleaned?

Wipe the marble column with a dry, soft microfibre cloth to remove dust. For marks, a barely-damp cloth with distilled water is acceptable, but avoid household sprays, polishes or chemical cleaners as marble is porous and can stain or dull with the wrong products.