Lucenza LED Halo Ring Alabaster Chandelier 600mm - Matt Black

The Lucenza is a 600mm halo ring chandelier built from a circle of natural Spanish alabaster blocks set into a matt black stainless steel frame. An integrated 3000K LED runs the full circumference of the ring, lighting each alabaster segment from within so the stone itself becomes the diffuser. The fitting is suspended from three discreet steel cables on a compact matt black ceiling rose.

Designed for dining tables, kitchen islands, entrance halls and open-plan living areas, the slim 70mm ring depth keeps the profile low while the 600mm diameter gives presence over a 1.2-1.6m table. The 1500mm cable drop is adjustable on installation, allowing the ring to be set 700-800mm above a dining surface or higher in rooms with vaulted or double-height ceilings. The downward-facing LED on the inner ring face washes light onto the table below.

Each alabaster block shows individual veining and tonal variation, so the lit ring reads as a sequence of distinct stone segments rather than a uniform band. The combination of pale alabaster against the matt black frame gives a graphic contrast when unlit and a warm, contained glow when switched on. The matt black finish minimises reflections and pairs with darker contemporary, industrial and Japandi-leaning interiors where polished metals would feel out of place.

What size table or island does the 600mm ring suit?

The 600mm diameter works well over dining tables and kitchen islands of approximately 1.2-1.6m in length. For longer tables, two Lucenza rings hung in line, or a larger ring fitting, give better visual balance and light coverage.

Is the cable drop adjustable?

Yes. The 1500mm steel cable suspension is adjustable on installation, so the ring can be set at the right height for the room. A typical hanging height is 700-800mm above a dining surface, measured from the underside of the ring.

Is the integrated LED replaceable?

The LED is integrated into the ring rather than a replaceable bulb. The fitting is rated for many thousands of hours of use and carries a 2-year warranty. Replacement of the LED module would need to be carried out by a qualified electrician if it ever failed.

Does each alabaster segment look the same?

No. Each block is cut from natural Spanish alabaster, so the veining, tone and translucency vary between segments and between individual fittings. This is a feature of the natural stone, not a defect, and is most visible when the chandelier is lit.