Lucenza LED 2 Tier Halo Ring Alabaster Chandelier - Matte Black

The Lucenza is a two-tier halo ring chandelier built from an 800mm upper ring and a 400mm lower ring, each formed from segments of natural Spanish alabaster set into a matte black stainless steel frame. Both tiers carry an integrated 3000K LED concealed inside the ring, casting warm white light downward and outward through the alabaster segments. The two halos hang from fine steel suspension cables off a single matte black ceiling canopy.

Designed for double-height entrance halls, stairwells, dining rooms and open-plan living areas, the staggered ring arrangement fills vertical space without the visual weight of a traditional crystal chandelier. The 1500mm cable drop suits ceilings of around 2.7m and above, with the lower ring sitting roughly 700-800mm above a dining table when fitted over one. The matte black frame anchors the fitting against pale ceilings while the alabaster keeps the overall presence luminous rather than heavy.

Each alabaster segment around the rings shows different mineral veining and tonal shifts, so the lit pattern across the two halos varies between individual pieces. The ring profile is just 70mm deep, keeping the silhouette graphic and architectural rather than chunky. Combined diameter across both tiers is 800mm at the widest point, giving the Lucenza enough scale to hold a 1.6-2m dining table or a generous hallway without crowding the ceiling plane.

Does the Lucenza come with bulbs?

Yes. Both rings use an integrated LED rated at 3000K warm white on 230V mains. There are no separate bulbs to fit or replace, and no lamp sockets are exposed.

What ceiling height is needed?

The 1500mm suspension cables suit ceilings of approximately 2.7m and above. The cables can be shortened during installation for lower ceilings, though the two-tier composition shows best with at least 600-800mm of clear space below the lower ring.

Can it be hung above a dining table?

Yes. The lower 400mm ring typically sits 700-800mm above the table surface when used as dining lighting. The 800mm overall diameter suits dining tables roughly 1.6-2m long, where the chandelier reads in proportion without overhanging the edges.

Why does the alabaster look different on each segment?

Each segment is cut from natural Spanish alabaster, so veining, translucency and tonal shifts vary between pieces. The variation is a feature of the natural stone rather than a manufacturing inconsistency, and becomes most visible once the LED is lit.