Description
The Laurin 220x70 2I G W is a twin-head round spotlight running on 220-240V AC, taking two GU10 lamps rated at up to 10W each. It uses the PAR16 reflector format, so the beam and brightness follow whichever GU10 lamps are fitted rather than a built-in LED output. The two heads sit on a single round backplate measuring 220mm across, letting each lamp be angled separately to send light where it is wanted. American buyers will recognise the GU10 twin-spot as a directional fixture for accent and task work, with both lamps independently aimed.
The fitting suits hallways, landings, home offices and living areas where two adjustable beams are more useful than one fixed downward wash. Because the heads pivot, it works well for picking out a feature wall, a reading chair or a worktop, with each lamp covering its own zone. Output depends entirely on the GU10 lamps chosen, so coverage is best judged by lamp lumens at the point of fitting. It mounts to either a wall or a ceiling, which gives flexibility on lower ceilings where a surface spot is easier to position than a recessed fitting.
Construction is aluminium alloy in a two-tone white and gold finish, with the round body and twin heads weighing 510g overall. The fitting carries an IP20 rating, so it is intended for dry indoor rooms only and should be kept clear of bathrooms, porches and any damp or outdoor location. It surface mounts to the wall or ceiling and accepts standard GU10 lamps, with dimming determined by the lamps and any wall control used. The white and gold body sits within the wider Laurin range, which includes single and multi-head versions in matching finishes.
Specification
| Power |
2 x max 10W |
| Voltage |
220-240 AC |
| IP rating |
IP20 |
| Mounting |
Wall Mounted, Ceiling Mounted |
| Cap / base |
GU10 |
| Light source |
PAR16 |
| Shape |
Round |
| Dimensions |
220 × 70 × 108 mm |
| Weight |
510 g |
| Material |
Aluminium Alloy |
| Finish |
White / Gold |
Downloads
Frequently Asked
What rooms is this spotlight suitable for?
It is rated IP20 for dry indoor use only, so it suits hallways, living rooms, home offices and bedrooms. Keep it out of bathrooms, porches and any damp or outdoor location, where a higher IP rating would be needed.
How is it mounted?
The fitting surface mounts to either a wall or a ceiling using the single round backplate, which is 220mm across. This makes it a good choice for lower ceilings or feature walls where a recessed fitting is not practical.
Does it take replaceable bulbs?
Yes. It takes two GU10 lamps in the PAR16 reflector format, each rated up to 10W, so the brightness and beam come from whichever lamps you fit. Both heads are adjustable so each lamp can be aimed independently.
How do I clean the fitting?
Switch off the power and let the lamps cool, then wipe the aluminium alloy body and heads with a soft dry or barely damp cloth. Avoid harsh cleaners or abrasives so the white and gold finish stays intact.