Laurin 110x70 GU10 Round Spotlight - White

The Laurin is a compact round ceiling light that takes a single GU10 PAR16 lamp rated up to 10W, running from a 220-240V AC mains supply. Its small 110mm round body throws a directional pool of light from one bright point, so the beam character follows whichever GU10 you fit rather than a built-in array. Across the Atlantic the same idea sits under the flush mount ceiling light heading, and the Laurin keeps that low, close-to-surface profile while staying suited to a wall position too.

The Laurin works well wherever a single accent or task pool is wanted rather than broad room fill, such as over a hallway console, a reading nook, a porch-free indoor entry or beside a kitchen worktop. Because it carries one GU10 lamp, treat it as a focused fitting and plan a few across a larger space rather than relying on one to wash a whole room. It mounts neatly on both ceilings and walls, which makes it easy to angle light onto a feature or to pick out a corner, and it suits standard domestic ceiling heights without dominating the surface.

The body is aluminium alloy in a white finish, weighing 250g, with a round form measuring 110 × 70 × 110 mm. It carries an IP20 rating, so it is intended for dry indoor rooms only and should be kept clear of bathrooms, damp areas and any outdoor position. The GU10 holder lets you swap the lamp freely to set your own wattage up to 10W, colour temperature and beam angle, and dimmability follows the lamp and switch you pair it with. The Laurin sits within a wider range of round and bar Laurin fittings if you want to match several points around a room.

Can the Laurin be used outdoors or in a bathroom?

No. The Laurin is rated IP20, which means it is for dry indoor use only. Keep it out of bathrooms, porches, carports and any damp or outdoor location, as it offers no protection against moisture or water ingress.

Does it take a replaceable bulb?

Yes. The Laurin uses a standard GU10 PAR16 lamp, rated up to 10W, which you supply and can replace yourself. This lets you choose the wattage, colour temperature and beam angle to suit the room, and swap the lamp later without changing the fitting.

Is the Laurin dimmable?

Dimming depends on the GU10 lamp and switch you fit rather than the fitting itself. Pair a dimmable GU10 with a compatible dimmer to control the brightness; with a non-dimmable lamp it runs at full output only.

How do I clean it?

Switch off and allow the lamp to cool, then wipe the white aluminium body with a soft, dry or slightly damp cloth. Avoid abrasive cleaners or solvents on the finish, and do not let moisture reach the lamp holder or electrical parts.