Description
The Jasmin is a round ceiling light built around a wooden frame in a wenge finish, taking three E27 lamps rated at up to 20W each so the brightness and tone are yours to choose by lamp. It mounts flush to the ceiling and measures Ø475 by 77 mm, giving it a low, near-flat profile rather than a deep pendant drop. With three separate lamp holders, the spread of light is even across the fitting, and US buyers will recognise this format as a flush mount LED ceiling light using standard screw-base lamps.
Round fittings like this one suit hallways, landings, bedrooms and living rooms where a tidy central light is wanted without a hanging fixture. The flush mounting works well on lower ceilings where a pendant would sit too close to head height, and the warm wooden body pairs with relaxed domestic rooms. Actual coverage and colour depend on the three E27 lamps fitted, so output can be tuned to the space by choosing higher or lower wattage and a warmer or cooler tone to match the room.
The fitting is made from wood with a wenge finish, weighs 3.10 kg and carries an IP20 rating, so it is for dry indoor use only and should be kept clear of bathrooms, porches and any damp location. It runs on 220-240V AC through three E27 holders and accepts standard LED screw-base lamps. Dimming depends on the lamps chosen rather than the fitting itself. The fixture is supplied without lamps, allowing the wattage and colour temperature to be specified to suit each room.
Specification
| Power |
3 x max 20W |
| Voltage |
220-240 AC |
| IP rating |
IP20 |
| Mounting |
Wall Mounted, Ceiling Mounted |
| Cap / base |
E27 |
| Light source |
LED |
| Shape |
Round |
| Dimensions |
Ø475 × 77 mm |
| Weight |
3.10 kg |
| Material |
Wood |
| Finish |
Wenge |
Downloads
Frequently Asked
What size room does this suit?
It works well as a central light in hallways, bedrooms and living rooms of small to medium size. Because it takes three E27 lamps, the actual brightness depends on the lamps you fit, so output can be matched to the room by choosing higher-wattage or warmer lamps.
Can it be used in a bathroom or outdoors?
No. This fitting is rated IP20, which means dry indoor use only. Keep it away from bathrooms, showers, porches and any damp or outdoor location.
Does it come with bulbs included?
No, the lamps are supplied separately. It uses three E27 screw-base holders rated at up to 20W each, so you can fit standard LED lamps in your preferred wattage and colour temperature.
How do I clean the wooden body?
Switch the fitting off and let any lamps cool, then wipe the wenge wood surface with a soft, dry or slightly damp cloth. Avoid soaking the wood or using harsh solvents so the finish stays in good condition.