Description
The Frosmarne is a round LED flush ceiling light, 37cm in diameter and just 7.5cm high, so it sits close to the ceiling. A white plastic diffuser fills the centre, and around it curve split bands of black steel whose rounded ends overlap, so the frame reads like a ribbon wrapped loosely around the light. The LED is integrated, drawing 20W and giving 2,400 lumens of warm light at 3000K. It is rated IP20, which settles where it belongs: indoors, in dry rooms, away from steam and splashing water.
Because it is a flush fitting, we would choose it for rooms where a pendant would hang too low: a living room with a modest ceiling height, a bedroom, a hallway or a landing. Mounted at the centre of the ceiling, its 2,400 lumens give a bright, even spread for everyday living, reading, tidying and getting ready. The black and white contrast sits well against pale walls and plain shelving, and gives a monochrome scheme a crisp outline overhead without costing any headroom.
The body is black steel and the diffuser is white plastic, a pairing that keeps the frame bold while the light inside stays soft. There is no switch on the fitting itself and it is not dimmable, so it is controlled from your wall switch; pair it with a standard switch rather than a dimmer. It runs on 220-240V, 50/60Hz mains, carries an energy class of E and weighs 1.364KG packed. As a wired-in mains light, it is installed by a qualified electrician, and the installation instructions are available as a download. Once it is in place, there is nothing to set or adjust: flick the wall switch and the room is lit.
Specification
| Height |
7.5cm |
| Diameter |
37cm |
| Body Material |
Steel |
| Body Colour |
Black |
| Shade Material |
Plastic |
| Shade Colour |
White |
| Light Source |
LED, integrated |
| Wattage |
20W |
| Lumens |
2,400lm |
| Colour Temperature |
3000K |
| Dimmable |
No |
| Switch |
None (switched at the wall) |
| IP Rating |
IP20 |
| Protection Class |
Class I |
| Voltage |
220-240V, 50/60Hz |
| Energy Class |
E |
| Weight (packed) |
1.364KG |
Downloads
Installation Instructions (PDF)
Frequently Asked
Can this ceiling light go in a bathroom?
No. It is rated IP20, which means indoors and dry rooms only, so we would keep it out of bathrooms and outdoor spaces.
Is the LED light dimmable?
No, it is not dimmable. The light is controlled from your wall switch, so use a standard switch rather than a dimmer switch.
How bright is the light, and what colour is it?
The integrated LED draws 20W and gives 2,400 lumens at 3000K, a warm light that feels comfortable in living rooms and bedrooms.
How big is the Frosmarne ceiling light?
It measures 37cm in diameter and just 7.5cm high, so it sits close to the ceiling and suits rooms with lower ceilings.
Does it need a bulb?
No bulb is needed. The LED is integrated into the light, so there is no separate lamp to buy or fit.
What finish does the frame have?
The frame is black steel, curved into split bands around a white plastic diffuser, giving a clean monochrome look that suits pale walls.