Free Delivery on all orders over £99*

COB LED Strip 8W/m 5m 12V Dot-Free Cuttable - Cool White

£1899
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This COB LED strip puts out a continuous, dot-free line of light along a flexible 5 metre reel, drawing 8W per metre for 760 lumens per metre at a crisp 4000K cool white. Unlike older spaced-diode tape, the chip-on-board layout hides the individual LEDs behind a uniform glow, so there are no visible hotspots along the run. The strip is sold by the led strip lights category as a true led tape, and what US buyers tend to call light strip works the same way here: a low-profile line you fix where a bright, even wash is wanted.

Around the home it suits dry indoor settings such as under kitchen cabinets, along shelving, inside display cabinets and into cove or skirting recesses where you want light without seeing the source. At IP00 it is strictly a dry indoor fitting, so keep it clear of bathrooms, porches and any damp or outdoor location. The even output and Ra90 colour rendering make it a strong choice for task and accent runs where you want surfaces and finishes shown accurately, and the 5 metre reel can be trimmed back to fit shorter spans so it follows worktops, alcoves and recesses cleanly.

The strip cuts to length at the marked points every 2.5 cm, so it can be sized to a run without waste. It is a 12V DC strip, which means it is not a mains-direct product: it needs a matching 12V LED driver, supplied separately, sized to the total wattage of the length you install. Rated for around 30,000 hours of life and weighing just 62g for the full reel, the self-adhesive backing presses onto a clean, dry surface for a quick fix. This cool white version sits within a wider COB LED Strip range that includes other outputs and tones to match the run you need.

Specification
Power 8 W/m
Luminous flux 760 lm/m
Efficiency 95 lm/W
Voltage 12V DC
Driver 12V DC LED driver required (sold separately)
IP rating IP00
Colour temperature 4000K (Cool White)
Colour rendering (CRI) Ra 90
Cut interval every 2.5 cm
Reel length 5 m
Downloads

Product Specification Sheet

Range Datasheet

Frequently Asked

Does this strip need a driver?

Yes. It runs on 12V DC, so it cannot connect straight to the mains and needs a matching 12V LED driver, which is sold separately. Size the driver to the total wattage of the length you fit, allowing 8W for every metre of strip in the run.

Can the strip be cut to length?

Yes. It can be trimmed every 2.5 cm at the marked cut points along the 5 metre reel. Only cut at those marks so the circuit stays intact, then the remaining length wires back to the driver as normal.

Can I use it outdoors or in a bathroom?

No. This strip is rated IP00, which means dry indoor use only. Keep it out of bathrooms, porches and any damp or outdoor location, where a coated IP65 strip would be needed instead.

How do I clean the strip?

Switch it off and let it cool, then wipe the surface gently with a dry or barely damp lint-free cloth. Avoid soaking it or using solvents, as this is an unsealed IP00 strip and water should be kept away from the diodes and connections.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This COB LED strip puts out a continuous, dot-free line of light along a flexible 5 metre reel, drawing 8W per metre for 760 lumens per metre at a crisp 4000K cool white. Unlike older spaced-diode tape, the chip-on-board layout hides the individual LEDs behind a uniform glow, so there are no visible hotspots along the run. The strip is sold by the led strip lights category as a true led tape, and what US buyers tend to call light strip works the same way here: a low-profile line you fix where a bright, even wash is wanted.

    Around the home it suits dry indoor settings such as under kitchen cabinets, along shelving, inside display cabinets and into cove or skirting recesses where you want light without seeing the source. At IP00 it is strictly a dry indoor fitting, so keep it clear of bathrooms, porches and any damp or outdoor location. The even output and Ra90 colour rendering make it a strong choice for task and accent runs where you want surfaces and finishes shown accurately, and the 5 metre reel can be trimmed back to fit shorter spans so it follows worktops, alcoves and recesses cleanly.

    The strip cuts to length at the marked points every 2.5 cm, so it can be sized to a run without waste. It is a 12V DC strip, which means it is not a mains-direct product: it needs a matching 12V LED driver, supplied separately, sized to the total wattage of the length you install. Rated for around 30,000 hours of life and weighing just 62g for the full reel, the self-adhesive backing presses onto a clean, dry surface for a quick fix. This cool white version sits within a wider COB LED Strip range that includes other outputs and tones to match the run you need.

    Specification
    Power 8 W/m
    Luminous flux 760 lm/m
    Efficiency 95 lm/W
    Voltage 12V DC
    Driver 12V DC LED driver required (sold separately)
    IP rating IP00
    Colour temperature 4000K (Cool White)
    Colour rendering (CRI) Ra 90
    Cut interval every 2.5 cm
    Reel length 5 m
    Downloads

    Product Specification Sheet

    Range Datasheet

    Frequently Asked

    Does this strip need a driver?

    Yes. It runs on 12V DC, so it cannot connect straight to the mains and needs a matching 12V LED driver, which is sold separately. Size the driver to the total wattage of the length you fit, allowing 8W for every metre of strip in the run.

    Can the strip be cut to length?

    Yes. It can be trimmed every 2.5 cm at the marked cut points along the 5 metre reel. Only cut at those marks so the circuit stays intact, then the remaining length wires back to the driver as normal.

    Can I use it outdoors or in a bathroom?

    No. This strip is rated IP00, which means dry indoor use only. Keep it out of bathrooms, porches and any damp or outdoor location, where a coated IP65 strip would be needed instead.

    How do I clean the strip?

    Switch it off and let it cool, then wipe the surface gently with a dry or barely damp lint-free cloth. Avoid soaking it or using solvents, as this is an unsealed IP00 strip and water should be kept away from the diodes and connections.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.