Free Delivery on all orders over £99*

COB LED Strip 3W/m 5m Warm White Cut-to-Length - 12V

£1399
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The COB LED Strip is a continuous, dot-free line of diodes on a flexible 5m reel, giving a smooth even run of light with none of the spotting you get from spaced SMD chips. It draws 3W per metre and puts out 288 lumens per metre in a warm white 3000K tone, with a CRI of Ra80 for natural-looking colour. Often sold as LED tape, this is a low-voltage strip that runs from a 12V DC supply rather than direct from the mains.

It works best for indoor accent and task runs where the light source itself should stay hidden: under kitchen wall units, along shelving and cove details, behind a headboard or beneath a stair handrail. The continuous COB format makes it well suited to lines that are viewed directly, such as a glazed cabinet or an open shelf edge, because there are no visible dots reflecting in the glass. Output is modest at 3W per metre, so treat it as a layer of accent and under-cabinet light rather than a room's main source. The strip carries an IP00 rating, so keep it to dry interior locations and clear of bathrooms, splash zones and any damp or outdoor setting.

The strip is built on a flexible backing that cuts to length only at the marked points, every 2.5cm, with free cable ends for connection. It needs a matching 12V DC LED driver, sized to the total wattage of the run and supplied separately, so it does not plug straight into a wall socket. The warm white diodes are rated for around 30,000 hours and the reel weighs 52g. We also stock matching drivers and connectors across the strip range to complete an installation.

Specification
Power 3 W/m
Luminous flux 288 lm/m
Efficiency 96 lm/W
Voltage 12V DC
Driver 12V DC LED driver required (sold separately)
IP rating IP00
Colour temperature 3000K (Warm White)
Colour rendering (CRI) Ra 80
Cut interval every 2.5 cm
Reel length 5 m
Downloads

Product Specification Sheet

Range Datasheet

Frequently Asked

Does it need a separate driver?

Yes. This is a 12V DC strip, so it cannot run directly from the mains and needs a matching 12V LED driver. Size the driver to the total wattage of your run, allowing 3W for every metre of strip, and order it separately.

Can the strip be cut to length?

Yes. It cuts to length at the marked cut points, which fall every 2.5cm along the reel. Only cut on those marks so the circuit stays intact, and use the free cable ends to make your connections.

Can it be used outdoors or in a bathroom?

No. This strip is rated IP00, which means it is for dry indoor locations only. Keep it out of bathrooms, kitchens splash zones and any damp or outdoor setting, and choose a coated IP65 strip for those areas instead.

How do I clean the strip?

Switch off the supply and wipe gently along the strip with a dry or barely damp lint-free cloth. Avoid soaking it or using solvents, as the diodes and cable ends are not sealed against moisture on an IP00 strip.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The COB LED Strip is a continuous, dot-free line of diodes on a flexible 5m reel, giving a smooth even run of light with none of the spotting you get from spaced SMD chips. It draws 3W per metre and puts out 288 lumens per metre in a warm white 3000K tone, with a CRI of Ra80 for natural-looking colour. Often sold as LED tape, this is a low-voltage strip that runs from a 12V DC supply rather than direct from the mains.

    It works best for indoor accent and task runs where the light source itself should stay hidden: under kitchen wall units, along shelving and cove details, behind a headboard or beneath a stair handrail. The continuous COB format makes it well suited to lines that are viewed directly, such as a glazed cabinet or an open shelf edge, because there are no visible dots reflecting in the glass. Output is modest at 3W per metre, so treat it as a layer of accent and under-cabinet light rather than a room's main source. The strip carries an IP00 rating, so keep it to dry interior locations and clear of bathrooms, splash zones and any damp or outdoor setting.

    The strip is built on a flexible backing that cuts to length only at the marked points, every 2.5cm, with free cable ends for connection. It needs a matching 12V DC LED driver, sized to the total wattage of the run and supplied separately, so it does not plug straight into a wall socket. The warm white diodes are rated for around 30,000 hours and the reel weighs 52g. We also stock matching drivers and connectors across the strip range to complete an installation.

    Specification
    Power 3 W/m
    Luminous flux 288 lm/m
    Efficiency 96 lm/W
    Voltage 12V DC
    Driver 12V DC LED driver required (sold separately)
    IP rating IP00
    Colour temperature 3000K (Warm White)
    Colour rendering (CRI) Ra 80
    Cut interval every 2.5 cm
    Reel length 5 m
    Downloads

    Product Specification Sheet

    Range Datasheet

    Frequently Asked

    Does it need a separate driver?

    Yes. This is a 12V DC strip, so it cannot run directly from the mains and needs a matching 12V LED driver. Size the driver to the total wattage of your run, allowing 3W for every metre of strip, and order it separately.

    Can the strip be cut to length?

    Yes. It cuts to length at the marked cut points, which fall every 2.5cm along the reel. Only cut on those marks so the circuit stays intact, and use the free cable ends to make your connections.

    Can it be used outdoors or in a bathroom?

    No. This strip is rated IP00, which means it is for dry indoor locations only. Keep it out of bathrooms, kitchens splash zones and any damp or outdoor setting, and choose a coated IP65 strip for those areas instead.

    How do I clean the strip?

    Switch off the supply and wipe gently along the strip with a dry or barely damp lint-free cloth. Avoid soaking it or using solvents, as the diodes and cable ends are not sealed against moisture on an IP00 strip.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.