Free Delivery on all orders over £99*

COB LED Strip 3W/m 5m IP65 24V Cut-to-Length - Daylight

£2099
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The COB LED Strip is a continuous, dot-free line of diodes on a flexible reel, giving an even band of light with none of the spotting you get from spaced SMD strips. It draws 3W per metre and puts out 300 lumens per metre in a Daylight 6500K tone, with a CRI of Ra80 for clean, accurate colour. Sold by many as LED tape or a light strip in the US, it runs on 24V DC rather than straight off the mains, so it pairs with a matching 24V LED driver (supplied separately). The 5m reel cuts to length at the marked points every 5cm, letting you size each run to the gap you are lighting.

Because the light is delivered as a soft, linear glow rather than a directed beam, this strip suits cove detailing, under-cabinet task light, shelf and plinth lighting, stair edges and outline runs. The IP65 rating means it copes with damp and sheltered outdoor positions such as eaves, soffits, garden structures and bathroom coves, so a single reel can move between an indoor kitchen run and a covered patio edge. Coverage is best judged by the length you fit rather than a floor area, since the output spreads along the strip; plan the run to wash the surface you want lit and add a further reel for longer spans, joining at the cut points.

Mounted on a self-adhesive flexible backing, the strip presses onto clean, dry profiles and channels, and an aluminium extrusion is worth adding for heat spread and a tidier finish on longer runs. The free cable ends make wiring into the 24V driver straightforward, and the IP65 coating seals the diodes against splashes and dust. Rated for around 30,000 hours, it is a low-maintenance way to add linear light. Other lengths and complementary profiles sit alongside it in the range.

Specification
Power 3 W/m
Luminous flux 300 lm/m
Efficiency 100 lm/W
Voltage 24V DC
Driver 24V DC LED driver required (sold separately)
IP rating IP65
Colour temperature 6500K (Daylight)
Colour rendering (CRI) Ra 80
Cut interval every 5 cm
Reel length 5 m
Downloads

Product Specification Sheet

Range Datasheet

Frequently Asked

Does this strip need a driver?

Yes. It runs on 24V DC, not mains voltage, so it must be wired to a matching 24V LED driver, which is supplied separately. Size the driver to the total wattage of the run, allowing 3W for every metre of strip you connect.

Can it be cut to length?

Yes. The reel can be cut at the marked points every 5cm, so you can trim each run to fit the space exactly. Always cut on the marked line and use the free cable ends or a suitable connector to wire the cut section back to the driver.

Can it be used outdoors?

Yes, within reason. The IP65 rating means it is sealed against dust and water jets, so it is suitable for sheltered and exposed outdoor positions such as eaves, soffits and garden structures, as well as damp indoor spots. Keep the driver itself in a dry or suitably rated enclosure.

How do I clean it?

Switch off at the driver and let the strip cool, then wipe the coated surface with a soft, slightly damp cloth and dry it off. Avoid solvents and harsh cleaners, which can mark the IP65 coating. A gentle wipe is usually all that is needed to keep the output bright.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The COB LED Strip is a continuous, dot-free line of diodes on a flexible reel, giving an even band of light with none of the spotting you get from spaced SMD strips. It draws 3W per metre and puts out 300 lumens per metre in a Daylight 6500K tone, with a CRI of Ra80 for clean, accurate colour. Sold by many as LED tape or a light strip in the US, it runs on 24V DC rather than straight off the mains, so it pairs with a matching 24V LED driver (supplied separately). The 5m reel cuts to length at the marked points every 5cm, letting you size each run to the gap you are lighting.

    Because the light is delivered as a soft, linear glow rather than a directed beam, this strip suits cove detailing, under-cabinet task light, shelf and plinth lighting, stair edges and outline runs. The IP65 rating means it copes with damp and sheltered outdoor positions such as eaves, soffits, garden structures and bathroom coves, so a single reel can move between an indoor kitchen run and a covered patio edge. Coverage is best judged by the length you fit rather than a floor area, since the output spreads along the strip; plan the run to wash the surface you want lit and add a further reel for longer spans, joining at the cut points.

    Mounted on a self-adhesive flexible backing, the strip presses onto clean, dry profiles and channels, and an aluminium extrusion is worth adding for heat spread and a tidier finish on longer runs. The free cable ends make wiring into the 24V driver straightforward, and the IP65 coating seals the diodes against splashes and dust. Rated for around 30,000 hours, it is a low-maintenance way to add linear light. Other lengths and complementary profiles sit alongside it in the range.

    Specification
    Power 3 W/m
    Luminous flux 300 lm/m
    Efficiency 100 lm/W
    Voltage 24V DC
    Driver 24V DC LED driver required (sold separately)
    IP rating IP65
    Colour temperature 6500K (Daylight)
    Colour rendering (CRI) Ra 80
    Cut interval every 5 cm
    Reel length 5 m
    Downloads

    Product Specification Sheet

    Range Datasheet

    Frequently Asked

    Does this strip need a driver?

    Yes. It runs on 24V DC, not mains voltage, so it must be wired to a matching 24V LED driver, which is supplied separately. Size the driver to the total wattage of the run, allowing 3W for every metre of strip you connect.

    Can it be cut to length?

    Yes. The reel can be cut at the marked points every 5cm, so you can trim each run to fit the space exactly. Always cut on the marked line and use the free cable ends or a suitable connector to wire the cut section back to the driver.

    Can it be used outdoors?

    Yes, within reason. The IP65 rating means it is sealed against dust and water jets, so it is suitable for sheltered and exposed outdoor positions such as eaves, soffits and garden structures, as well as damp indoor spots. Keep the driver itself in a dry or suitably rated enclosure.

    How do I clean it?

    Switch off at the driver and let the strip cool, then wipe the coated surface with a soft, slightly damp cloth and dry it off. Avoid solvents and harsh cleaners, which can mark the IP65 coating. A gentle wipe is usually all that is needed to keep the output bright.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.