Free Delivery on all orders over £99*

COB LED Strip 3W/m 5m IP65 12V - Warm White

£2099
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This COB LED strip puts out a continuous, dot-free line of light along a flexible reel, drawing 3W per metre and delivering 276 lumens per metre in a warm white 3000K tone. Often sold as LED tape light in the US, the COB build packs the diodes into an unbroken run so you see an even glow rather than the spotting of older spaced-diode tape. It runs on 12V DC, so it needs a matching 12V LED driver, supplied separately, rather than connecting straight to the mains. The strip cuts to length at the marked points every 2.5cm, letting you size each run to the space.

Rated IP65, this strip is coated against moisture and copes with damp and sheltered outdoor positions as well as dry indoor ones, which suits it to kitchen plinths, under-cabinet runs, cove and ceiling recesses, garden eaves and covered patio edges. The warm 3000K output gives a soft, low-glare accent rather than broad room lighting, so think of it as outline and task-edge illumination, grazing along a surface or picking out a recess instead of lighting a whole room. Plan each length around the 2.5cm cut interval and keep within the driver's rated load when joining sections.

The diodes sit on a slim flexible reel with free cable ends for wiring into a 12V DC supply, and at Ra80 the colour rendering keeps surfaces looking natural. Rated for 30,000 hours, the strip weighs around 80g and stays low-profile enough to tuck into channels and recesses. The IP65 coating means it can be wiped clean and used where the odd splash is likely. This strip sits within our wider COB LED Strip range, with matching drivers and connectors available to complete an install.

Specification
Power 3 W/m
Luminous flux 276 lm/m
Efficiency 92 lm/W
Voltage 12V DC
Driver 12V DC LED driver required (sold separately)
IP rating IP65
Colour temperature 3000K (Warm White)
Colour rendering (CRI) Ra 80
Cut interval every 2.5 cm
Reel length 5 m
Downloads

Product Specification Sheet

Range Datasheet

Frequently Asked

Does this strip need a driver?

Yes. It runs on 12V DC, so it must be powered through a matching 12V LED driver rather than wired straight to the mains. The driver is supplied separately, and you should size it to cover the total wattage of the run you fit at 3W per metre.

Can the strip be cut to length?

Yes. It can be cut to size at the marked cut points, which fall every 2.5cm along the reel. Only cut at those marks, and use the free cable ends to wire the cut length back into the 12V supply.

Is it suitable for outdoor or damp use?

Yes. The IP65 rating means it is coated against moisture and will handle damp and sheltered outdoor spots such as covered patios, garden eaves and kitchen splash zones. It copes with the odd splash, though full submersion is not intended.

How do I clean it?

Wipe the strip with a soft, slightly damp cloth once it is switched off and cool. The IP65 coating lets you remove dust and light splashes without water getting into the diodes. Avoid solvents or abrasive cleaners that could mark the coating.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This COB LED strip puts out a continuous, dot-free line of light along a flexible reel, drawing 3W per metre and delivering 276 lumens per metre in a warm white 3000K tone. Often sold as LED tape light in the US, the COB build packs the diodes into an unbroken run so you see an even glow rather than the spotting of older spaced-diode tape. It runs on 12V DC, so it needs a matching 12V LED driver, supplied separately, rather than connecting straight to the mains. The strip cuts to length at the marked points every 2.5cm, letting you size each run to the space.

    Rated IP65, this strip is coated against moisture and copes with damp and sheltered outdoor positions as well as dry indoor ones, which suits it to kitchen plinths, under-cabinet runs, cove and ceiling recesses, garden eaves and covered patio edges. The warm 3000K output gives a soft, low-glare accent rather than broad room lighting, so think of it as outline and task-edge illumination, grazing along a surface or picking out a recess instead of lighting a whole room. Plan each length around the 2.5cm cut interval and keep within the driver's rated load when joining sections.

    The diodes sit on a slim flexible reel with free cable ends for wiring into a 12V DC supply, and at Ra80 the colour rendering keeps surfaces looking natural. Rated for 30,000 hours, the strip weighs around 80g and stays low-profile enough to tuck into channels and recesses. The IP65 coating means it can be wiped clean and used where the odd splash is likely. This strip sits within our wider COB LED Strip range, with matching drivers and connectors available to complete an install.

    Specification
    Power 3 W/m
    Luminous flux 276 lm/m
    Efficiency 92 lm/W
    Voltage 12V DC
    Driver 12V DC LED driver required (sold separately)
    IP rating IP65
    Colour temperature 3000K (Warm White)
    Colour rendering (CRI) Ra 80
    Cut interval every 2.5 cm
    Reel length 5 m
    Downloads

    Product Specification Sheet

    Range Datasheet

    Frequently Asked

    Does this strip need a driver?

    Yes. It runs on 12V DC, so it must be powered through a matching 12V LED driver rather than wired straight to the mains. The driver is supplied separately, and you should size it to cover the total wattage of the run you fit at 3W per metre.

    Can the strip be cut to length?

    Yes. It can be cut to size at the marked cut points, which fall every 2.5cm along the reel. Only cut at those marks, and use the free cable ends to wire the cut length back into the 12V supply.

    Is it suitable for outdoor or damp use?

    Yes. The IP65 rating means it is coated against moisture and will handle damp and sheltered outdoor spots such as covered patios, garden eaves and kitchen splash zones. It copes with the odd splash, though full submersion is not intended.

    How do I clean it?

    Wipe the strip with a soft, slightly damp cloth once it is switched off and cool. The IP65 coating lets you remove dust and light splashes without water getting into the diodes. Avoid solvents or abrasive cleaners that could mark the coating.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.