Free Delivery on all orders over £99*

COB LED Strip 3W/m 24V Cool White - 5m Reel

£1399
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The COB LED Strip gives a continuous, dot-free line of light across a flexible 5m reel, with the diodes packed so closely that no individual points show through the run. It draws 3W per metre and delivers 316 lumens per metre in a cool white 4000K tone, with a CRI of Ra 80 for clean, even colour. Often sold as LED tape, this is the same idea many US buyers know as light strip or tape light, just in a higher-density COB build that hides the usual spotting.

The strip suits under-cabinet runs, shelf and cove detailing, and outline lighting where you want a smooth band rather than a row of dots. Its cool white output reads bright and crisp, so it works well over worktops, in display cases and along stair edges or skirting where a continuous accent line lifts the space. Because it is IP20 rated, keep it to dry indoor positions only, away from bathrooms, porches and any damp or outdoor setting. The reel cuts to length at the marked points every 5cm, so you can size each section to the run it lights.

Built on a flexible PCB with free cable ends for wiring in, the strip runs on 24V DC and needs a matching 24V LED driver, which is sold separately, so it is not connected straight to the mains. State the driver rating to the loaded length so it is not undersized. Rated for around 30,000 hours, the reel measures 8mm wide and weighs only 52g, making it easy to route along tight edges. The wider range includes further strips and drivers to match the install.

Specification
Power 3 W/m
Luminous flux 316 lm/m
Efficiency 105 lm/W
Voltage 24V DC
Driver 24V DC LED driver required (sold separately)
IP rating IP00
Colour temperature 4000K (Cool White)
Colour rendering (CRI) Ra 80
Cut interval every 5 cm
Reel length 5 m
Downloads

Product Specification Sheet

Range Datasheet

Frequently Asked

Does this strip need a driver?

Yes. It runs on 24V DC, so it needs a matching 24V LED driver rather than a direct mains connection. The driver is sold separately, and you should size it to the total loaded length of strip.

Can the strip be cut to length?

Yes. It can be shortened at the marked cut points, which fall every 5cm along the reel. Always cut only on these marks so the circuit stays intact, and wire in from the free cable ends.

Can it be used outdoors or in a bathroom?

No. This is an IP20 strip, so it is for dry indoor use only. Keep it clear of bathrooms, porches and any damp or outdoor location.

How do I clean and maintain it?

Wipe the surface gently with a dry or barely damp cloth once the strip is switched off and cool. Avoid solvents and soaking, and take care around the cut ends and solder points so the connections stay sound.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The COB LED Strip gives a continuous, dot-free line of light across a flexible 5m reel, with the diodes packed so closely that no individual points show through the run. It draws 3W per metre and delivers 316 lumens per metre in a cool white 4000K tone, with a CRI of Ra 80 for clean, even colour. Often sold as LED tape, this is the same idea many US buyers know as light strip or tape light, just in a higher-density COB build that hides the usual spotting.

    The strip suits under-cabinet runs, shelf and cove detailing, and outline lighting where you want a smooth band rather than a row of dots. Its cool white output reads bright and crisp, so it works well over worktops, in display cases and along stair edges or skirting where a continuous accent line lifts the space. Because it is IP20 rated, keep it to dry indoor positions only, away from bathrooms, porches and any damp or outdoor setting. The reel cuts to length at the marked points every 5cm, so you can size each section to the run it lights.

    Built on a flexible PCB with free cable ends for wiring in, the strip runs on 24V DC and needs a matching 24V LED driver, which is sold separately, so it is not connected straight to the mains. State the driver rating to the loaded length so it is not undersized. Rated for around 30,000 hours, the reel measures 8mm wide and weighs only 52g, making it easy to route along tight edges. The wider range includes further strips and drivers to match the install.

    Specification
    Power 3 W/m
    Luminous flux 316 lm/m
    Efficiency 105 lm/W
    Voltage 24V DC
    Driver 24V DC LED driver required (sold separately)
    IP rating IP00
    Colour temperature 4000K (Cool White)
    Colour rendering (CRI) Ra 80
    Cut interval every 5 cm
    Reel length 5 m
    Downloads

    Product Specification Sheet

    Range Datasheet

    Frequently Asked

    Does this strip need a driver?

    Yes. It runs on 24V DC, so it needs a matching 24V LED driver rather than a direct mains connection. The driver is sold separately, and you should size it to the total loaded length of strip.

    Can the strip be cut to length?

    Yes. It can be shortened at the marked cut points, which fall every 5cm along the reel. Always cut only on these marks so the circuit stays intact, and wire in from the free cable ends.

    Can it be used outdoors or in a bathroom?

    No. This is an IP20 strip, so it is for dry indoor use only. Keep it clear of bathrooms, porches and any damp or outdoor location.

    How do I clean and maintain it?

    Wipe the surface gently with a dry or barely damp cloth once the strip is switched off and cool. Avoid solvents and soaking, and take care around the cut ends and solder points so the connections stay sound.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.