Description
Steel, aluminium and acrylic in a warm brass and black finish give our Asteria Short LED Wall Light a compact, considered look that settles easily into a bedroom, hallway or reading nook. A round wall plate holds a short straight arm, and that arm carries a flat circular disc shade just 15cm across. The brass tone warms the fitting while the black keeps it grounded, and at only 9.6cm tall it sits close and neat against the wall without crowding the space around it.
Because this is a plug-in wall light, you skip the electrician entirely. A black fabric cable runs down from the wall plate to a plug, so all you do is mount it and connect it to the nearest socket. We include a 2.2m black cord, and the fitting extends 25cm from the wall to place light exactly where you want it, whether that is over a bedside table, beside a mirror or above a favourite armchair. Assembly takes around 10 minutes, so you can have it up and glowing the same afternoon. It carries CE, UKCA, WEEE and IP2X markings and is intended for indoor use.
The built-in 12W panel gives 500 lumen at a soft, warm 2700K, and with a CRI of 91 it renders the colours in your room truthfully. It is dimmable too, so you can take it from a working brightness down to a low evening wash. The light source is rated at 50000 hours, which is years of everyday use before you need to think about it again, and we back the whole fitting with our 10-year warranty. If you would rather wire it in later, please refer to the hardwire user guide for full instructions on how to hardwire the Asteria. For most homes, though, the plug-in version keeps things simple.
Specification
| Assembly Time |
10min |
| Height |
9.6cm |
| Depth |
25cm |
| Diameter |
15cm |
| Material |
Steel, aluminium and acrylic (Not Hardwired is incl. 2.2m black cord) |
| Markings, Tests & Certifications |
CE, UKCA, WEEE and IP2X (for indoor use) |
| Additional Information |
Please refer to the hardwire user guide for instructions on how to hardwire the Asteria Wall |
| Warranty |
10-year warranty |
| Lumen |
500 lumen |
| Light Hours |
50000 |
| Light Information |
CRI: 91 2700K |
| Light Source |
12W panel built-in |
| Dimmable |
This lamp is dimmable |
Downloads
Product Specifications
User Guide
Product Information Sheet
Driver Specification Sheet
Hardwire User Guide
Frequently Asked
Do I need an electrician to fit this light?
No, the Asteria is a plug-in fitting with a 2.2m black cord, so it simply plugs into a standard socket with no wiring in required. If you would prefer to hardwire it, please refer to the hardwire user guide for instructions.
What is the wall light made from?
It is made from steel, aluminium and acrylic, with a brass core colour and a black finish. the plug-in version includes a 2.2m black cord.
How much space does it take up on the wall?
The shade measures 15cm in diameter and the fitting stands 9.6cm high. As a plug-in version it projects 25cm from the wall.
How bright is it and can I dim it?
It gives 500 lumen from a built-in 12W panel and is dimmable. The light has a warm 2700K colour temperature with a CRI of 91.
Is this light suitable for use in a bathroom?
It carries an IP2X rating, which means it is intended for indoor use only and is not suited to damp or wet areas such as bathrooms.
How long does it take to put together?
Assembly takes around 10 minutes. The light source is a built-in panel rated for 50000 hours, so there is no bulb to fit.