Description
With our 15cm circular disc shade and an arm that reaches out to a depth of 42cm, this wall light holds its light well clear of the wall. The round wall plate sits close at just 9cm high, so the fitting keeps a low profile while the long straight arm does the work of pushing illumination where you want it. The proportions suit spots that need a bit of reach, above a reading chair, alongside a bed or over a console below. The finish is a warm Brass, with the plate, arm and disc all carrying a soft Pearl White tone across their surfaces.
Because it is a Plug-In fitting, you can put it up without an electrician. A black fabric cable runs down from the wall plate to a plug, giving you 2.2m of cord to reach the nearest socket, and assembly takes around 10 minutes. The body is made from steel, aluminium and acrylic, and the whole piece weighs only 804g, so mounting is straightforward on most walls. If you would rather run it into the mains later, we include a hardwire user guide covering that route. The lamp is dimmable, which lets you take it from a bright working level down to something quieter of an evening.
Inside sits a built-in 12W LED panel rated at 2700K and 500 lumen, a warm output with a CRI of 91 for honest colour rendering, and it is good for 50000 lighting hours or more. The fitting carries CE, UKCA and IP2X markings, and we back it with our 10-year warranty. Kept indoors, it suits a hallway, a home office or a bedside where a table lamp base would otherwise crowd the surface. We think the clean lines earn their place, and we stand behind the build for years to come.
Specification
| Assembly Time |
10min |
| Height |
9cm |
| Depth |
42cm |
| Diameter |
15cm |
| Weight |
804g |
| Material |
Steel, aluminium and acrylic: Incl. 2.2m black cord |
| Markings, Tests & Certifications |
CE, UKCA, IP2X |
| Additional Information |
Please refer to the hardwire user guide for instructions on how to hardwire the Asteria Wall |
| Warranty |
10-year warranty |
| Lumen |
2700K - 500 lumen |
| Light Information |
≥50000 lighting hours CRI: 91 |
| Light Source |
12W LED panel built-in |
| Dimmable |
This lamp is dimmable |
Downloads
Product Specifications
User Guide
Product Information Sheet
Driver Specification Sheet
Hardwire User Guide
Frequently Asked
What is the Asteria Long Wall Light made from?
It is made from steel, aluminium and acrylic, finished in Pearl White with a brass core colour. It also comes with a 2.2m black cord.
How do I fit this wall light?
It is a plug-in wall light, so it mounts on the wall and connects to a mains socket via the 2.2m black cord. Assembly takes around 10 minutes, and if you wish to hardwire it instead, please refer to the hardwire user guide for instructions.
What are the dimensions of this wall light?
It has a wall plate diameter of 15cm, a height of 9cm and a depth of 42cm. It weighs 804g.
Can I dim this wall light?
Yes, this wall light is dimmable. It uses a built-in 12W LED panel giving 500 lumen at a warm 2700K, with a CRI of 91.
How long will the light source last?
The built-in LED panel is rated for 50000 lighting hours or more, so it should serve you well over many years of use.
How should I care for this wall light?
Wipe the steel, aluminium and acrylic surfaces gently with a soft, dry cloth to keep the Pearl White finish clean. Avoid harsh cleaning products, which can damage the finish.