Description
Made from steel, aluminium and acrylic, our Asteria Long Monochrome Wall Light is finished in warm Polished Brass throughout. We have kept the design pared back, with a polished wall plate, a long straight arm and a flat disc shade all sharing the same single metal finish. The result reads as one clean line from wall to light, measuring 15cm in diameter and 9cm in height, with a depth of 44.6cm that lets the disc reach out into the room. Because this version is hardwired, no cable is visible, so the arm and shade appear to float against the wall.
The built-in 12W LED panel gives 500 lumen at a soft 2700K, a warm white that suits living spaces and bedrooms alike. With a CRI of 91, colours in the room stay true under the light, and the lamp is dimmable so you can drop the level for quiet evenings or lift it for reading. It is rated for around 50000 lighting hours, which means very little upkeep over the years. Assembly takes about ten minutes, and we ask that you refer to the hardwire user guide for instructions on how to hardwire the Asteria Wall before you begin. The lamp carries CE, UKCA, WEEE and IP2X markings and is intended for indoor use, and we back it with our 10-year warranty.
The Polished Brass finish carries the same warmth across the plate, arm and disc, giving a joined-up look that we find works well beside a mirror, over a bedside table or in a hallway where the long reach earns its place. To keep the finish looking its best, wipe it gently with a soft dry cloth and avoid abrasive cleaners. If you prefer a cooler tone, this lamp is also offered in Polished steel elsewhere in our range, but here the brass sets a softer, quieter mood.
Specification
| Assembly Time |
10min |
| Height |
9cm |
| Depth |
44.6cm |
| Diameter |
15cm |
| Material |
Steel, aluminium and acrylic: Incl. 2.2m black cord |
| Markings, Tests & Certifications |
CE, UKCA, WEEE and IP2X (for indoor use) |
| Additional Information |
Please refer to the hardwire user guide for instructions on how to hardwire the Asteria Wall |
| Warranty |
10-year warranty |
| Lumen |
500 lumen |
| Light Hours |
≥50000 |
| Light Information |
CRI: 91 2700K |
| Light Source |
12W LED panel built-in |
| Dimmable |
This lamp is dimmable |
Downloads
Product Specifications
User Guide
Product Information Sheet
Driver Specification Sheet
Hardwire User Guide
Frequently Asked
What is the Asteria wall light made from?
It is made from steel, aluminium and acrylic, finished in polished brass. A 2.2m black cord is included.
How is this wall light fitted?
This version is hardwired, so no cable is visible once installed. Please refer to the hardwire user guide for instructions on how to hardwire the Asteria Wall.
What are the dimensions?
Hardwired, the lamp measures 15cm in diameter, 9cm in height and 44.6cm in depth.
Is the lamp dimmable, and what light does it give?
Yes, this lamp is dimmable. It uses a built-in 12W LED panel producing 500 lumen at 2700K with a CRI of 91.
Can I use this indoors, and how long does it last?
It carries an IP2X rating for indoor use and is marked with CE, UKCA and WEEE. The light source is rated for at least 50000 lighting hours.
How long does assembly take?
Assembly takes around 10 minutes.